Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code and how to program.
Kisha Bryant,
Do you have a model number of your RCA universal remote?
You can try using theses remote codes to use your RCA remote with your Emerson TV… 11864 or 991
If those do not work try using 0154, 0236, 0463, 0180, 0282, 0179, 0038, 0177, 0280.
To program the RCA remote…
Turn on TV
Press TV key on the remote
Hold SETUP until TV key blinks twice
Type 991, TV key should blink twice
Press Power
If nothing happens, press TV, then press power. Repeat until TV turns off
When TV turns off, press the SETUP key to store the code.
-CUR
I’ve got an Insignia remote that accepts 5 digit codes and a Sharp CD player. Help me out?
Kaela,
Your Insignia remote should accept these 5 digit codes with your Sharp CD player: 30630, 30675, 32250.
-CUR
Need remote codes for Citizen TV combo VCR – Older TV
AL,
For a Citizen TV VCR COMBO have you tried 3 digit = 011, 027, 033, 064, 007, 009, 013, 044, 045, 046, 052
or 4 digit = 1004, 1007, 1015, 1036, 1073, 1097, 1100
-CUR
Do you have codes for KTC LCD TV 32t53? Thank you so much!
Nelford Tumala,
The KTC TV remote control codes use SONY’s universal remote codes. Check here for SONY’s codes then apply them.
-CUR
I own a Toshiba Blu-ray BDK-21 and I need the remote control code. I can’t find program code anywhere.
Toshiba bdk 21,
TOSHIBA BLU RAY Remote Codes: 049 089 105 109 117 118 120 159 178
-CUR
I need a remote code for a sony rxd10av please
Taylor,
Try the codes to control your Sony RXD10AV: 0158, 0159, 0474, 0220, 0689
-CUR
I have a GE universal remote and need codes for my 48″ Emerson HDTV. Model code: PL-P42W-10A
Tonya,
For EMERSON HDTV’s, try the following codes…
1172, 0004, 0009, 0044, 0135, 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0210, 0227, 0233, 0265, 0042, 0021, 0023, 0024, 0179, 0045, 5006, 5011, 5012, 5013, 5014, 5029, 5030, 5032, 5037, 5038, 5039, 5040, 5041, 5042, 5046, 5048, 5049, 5054, 5055, 5061, 5062, 5141, 5142, 5155, 5166, 5168, 5169, 5171, 5174
-CUR
I have a GE universal remote Model # RC24912-E2748. Need to pair remote to an insignia Digital Converter Box . Model # NS-DXA1 Is there a code available.
Larry Sinisi,
GE remote to Insignia Box = Code 456 should work. If not let us know and we will have to perform some tests with our test components to find the code for you.
-CUR
I am trying to find the code for a Sony DAV-HDX285 it is a DVD surround sound combo.
I cannot seem to find any that will work and help will be greatly appreciated.
Tyler,
Can you tell us the universal remote you are using to try to control the Sony DVD player? Do you happen to know if you need 3, 4, or 5 digit remote codes for your Sony DVD surround combo?
-CUR
Sony TV remote RM-V310
Lawrence,
Are you needing universal remote codes for a Sony TV? We have your remote control model number but what is it that you will be controlling?
-RR
I got a radio shack remoteh cat 15-1923 and I need codes for sony cd-dvd and audio system thank you.
Eduardo,
For the Sony DVD player try these universal remote codes: 166, 360, 361.
The radio shack website may also have the codes you need to program your 15-1923 remote control if the 3 codes above do not work.
Also try the Sony website for universal remote control codes.
-CUR