How To Program A Zenith Universal Remote Control

Here is how to program a Zenith Universal Remote Control. There are 2 ways with most Zenith remotes. You can either use a remote code that will work with the component you are going to setup, or use the CODE SEARCH button on the remote to auto find the correct remote code. Usually using the remote code manually is the fastest way as long as you have the correct remote code. See the links to the right (or on the bottom of this page if you are looking for a Universal TV Remote Code) to find the code numbers you may need to program a component to work with your Zenith remote control.

How To Program A Zenith Universal Remote ControlHow To Program A Zenith Universal Remote Control

 

Programming your Zenith remote with a remote control code:
1 – Turn on the media device you are going to program. (EX: If you are going to program a Blu-Ray player, turn the Blu-Ray player ON manually)

2 – Using your Zenith remote control – Press and hold the “CODE SEARCH” button and wait for the small light to illuminate.

3 – Once the small light on the remote illuminates, release the “CODE SEARCH” button.

4 – Find the button on the Zenith remote control that corresponds to the media device you are going to program. (EX: DVD, SAT, CAB, AUX)

5 – Now press and release the (EX: DVD, SAT, CAB, AUX) button for the media device you are programming.

6 – Find out the code you need for the media device you are setting up.
(The 3, 4, or 5 digit remote code for the media device you are programming should be located in the Zenith remote control instruction manual or by using our website and finding the remote code using the links to the right)

7 – Once you have found a list of remote codes for the media device you are programming… Enter the 3, 4, or 5 digit remote code into the remote using the number keys.

8 – The small light will turn off once a code is entered.

9 – Now check to be sure the remote code you entered into the Zenith remote is the correct code by pressing CHANNEL UP, VOLUME UP, OR POWER OFF to see if the code you entered is the correct code.

10 – If the media device responds, then you have entered the correct code, if not, keep trying different remote codes by following the same procedure above.

Programming your Zenith remote with the “Code Search” button:
1 – Turn on the media device you are going to setup or program. (EX: If you are going to program a DVD player, turn ON the DVD player manually)

2 – Using your Zenith remote control – Press and hold the “CODE SEARCH” button and wait for the small light to illuminate.

3 – Once the small light on the remote illuminates, release the “CODE SEARCH” button.

4 – Find the button on the Zenith remote control that corresponds to the media device you are going to program. (EX: DVD, SAT, CAB, AUX)

5 – Now press and release the (EX: DVD, SAT, CAB, AUX) button for the media device you are programming.

6 – Scroll through the codes that are already programmed into the Zenith remote by pressing either the “POWER” button or the “CHANNEL UP” button.
(This depends on the model number of your Zenith remote control, try both ways to see which one works for your specific Zenith remote)

7 – Keep pressing the “POWER” or “CHANNEL UP” button until you find a code that works.

8 – When you find the remote code that works with your media device simply press the “MUTE” button to save the code.

9 – If you find a code that works but you scroll past it, you need to press the “CHANNEL DOWN” button to go backwards to the previous code.

Here are 3 Digit Universal Remote Codes for Televisions that will work to program your Zenith Universal Remote Control:

Craig
805, 906

Daewoo
002, 102, 110, 203, 214, 221, 303, 311, 314

Emerson
002, 003, 004, 005, 006, 014, 104, 105

Fisher
506, 606, 619, 902

Fujitsu
206

Funai
206, 805, 906

GE
002, 007, 018, 107, 310, 318, 502, 601, 719, 803

Goldstar
002, 102, 117, 207, 217, 307, 502, 713, 818, 916

Hitachi
002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619

JVC
007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902

Magnavox
002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510

Memorex
102, 502, 506, 601, 701

Mitsubishi
002, 102, 114, 206, 502, 509, 510, 619, 709, 803

Panasonic
017, 516, 618, 807, 901

Philips
002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508

Proscan
601, 719

RCA
002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514

Samsung
002, 102, 103, 112, 212, 502, 512, 702, 818, 908

Sansui
215

Sanyo
002, 312, 412, 506, 619, 902

Sharp
002, 013, 111, 502, 712, 812, 813, 918

Sony
202, 801

Sylvania
002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717

Symphonic
117, 520, 904, 906

Toshiba
112, 313, 413, 506, 510, 512, 902

Zenith
008, 117, 311, 405, 407, 512, 601, 701, 713, 916

The Zenith remote control programming methods above apply to model number remotes: ZEN100, ZEN300, ZEN350, ZEN400, ZEN425, ZEN450, ZEN500, ZEN525, ZEN700, ZEN725, ZEN800 and ZEN900.

To program a Universal or TV remote control: See the links below and find the brand and model of your remote control. You can also check the remote programming instructions included in the packaging of your remote or find a YouTube video for your specific model number remote.

Once you find the step-by-step instructions to program the remote to work with your ZENITH REMOTE, use the remote codes included on this page.

How to program a specific remote control: Including Satellite, Cable, TV, and Universal remotes – COX remote, ONE FOR ALL remote, DIRECTV remote, CHUNGHOP remote, JUMBO remote, GT MATRIX remote, Zenith remote, Vizio remote, RCA remote, Comcast remote, DISH remote, Samsung remote, Mitsubishi remote, SONY remote, Philips remote, On-Q Home Systems remote, GE remote, and the UR5U-8780 remote.

Jump to the MOST COMMON UNIVERSAL REMOTE CODES FOR TV here: The most common 2, 3, 4, and 5 digit universal remote codes can be found on the following pages: 2 digit TV remote codes, 3 digit TV remote codes, 4 digit TV remote codes, and 5 digit TV remote codes.

PLEASE HELP US AND ALL THE READERS If you have found a remote code that works with your ZENITH REMOTE, please use the comment form below and tell us and all our readers which remote code worked for which device. Your help will be much appreciated!

Need help? Let us know if you are having trouble programming your Zenith remote control and we can help. Leave your question below.

6 thoughts on “How To Program A Zenith Universal Remote Control”

  1. turn on the tv, press and hold the button at the top that corresponds to the kind of device it is (TV, CBL, or DVD) and put in the 4 digit code that corresponds to that device, or simply turn on the TV, hold the button at the top that corresponds to the type of device you’re trying to connect it to and the OK button at the same time, and release as soon as it turns off.

  2. How to reset remote? trying to program the remote to my TV and it seems to be lock on another TV I need help resetting

  3. Hello, Sonja,

    I am not a seller, but I am looking for the exact same remote you were: for the Zenith XBV713 combo player. I ordered two remotes online, and neither one worked. Did you find one, or did you get a universal remote? Thank you.

    Mike

  4. Looking for a compatible remote control for R1P081V for VCR/DVD player – model XBV713 – DVD Player + Video Cassette Recorder.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.