Samsung Soundbar Remote Control Codes

By / July 26, 2019

Looking for Samsung Soundbar Remote Codes? If you have a Samsung Sound Bar and want to control it with a universal remote control, SAT, or CABLE TV remote, we have the codes needed.

Remote Control Codes For Samsung Soundbars

Remote Control Codes For Samsung Soundbars

A Samsung soundbar can be controlled with any universal remote or CABLE/SAT remote if you have the correct programming guide. You also need the correct remote codes for the sound bar which can be found below. If the codes below do not work with your Samsung sound bar, please leave a comment below with the model number of your remote control and the model number of your soundbar and we will find you the correct remote code.

Program your universal remote control, Cable remote, or SAT remote to a Samsung Sound Bar. Use the following 5 digit remote codes…

Samsung Sound Bar 5 Digit Remote Control Codes:
32609
22609
32660
31949
21014
20045

All remote codes above are reported working with the Samsung Soundbar Model Numbers: HW-FM55C, FM550, HE550, HW-HM45, F550, J450, HW-E450, HW-J450, HW-J650, HW-F450, WH-E450, HW-J355, HW-D450, HW-H550, HW-H7500/ZA, and HW-HM55C.

These codes have been tested with the Comcast remote controls, Xfinity, DirecTV, DISH, COX, Verizon Fios, and many more.

HINT: Use your Cable, SAT, or Universal remote control in “AUX MODE” to control your Samsung Soundbar.

Note: If you have a Samsung TV, the Samsung Soundbar should automatically PAIR to the TV and the Samsung TV remote should control the sound for both the TV and Soundbar. It connects wirelessly on some models.

Need more help programming your Universal or CAB SAT remote to your Samsung soundbar? Please leave your questions below and we will be happy to assist.

109 thoughts on “Samsung Soundbar Remote Control Codes”

  3. Brett Breaux

    I have a Samsung HW-J450/ZA and cannot get my dish network remote to control the volume

  4. Gladstone vaz

    I have hw 450 samsung sound bar an my remote is cable/sat ur5u-9000l
    Please send me the code

  6. mark

    I have the same problem with my sound bar model HW-F355 from Samsung.
    I tried many universal remote controls like 2 models from GE 1 model from Shaw and the Giant remote.
    Non worked using the codes or the scan.
    The silver remote from GE went bad and lost control on other devices it used to control.
    So I tried to program the Tv again using scan method but for my surprise on the second time I press the power button to scan codes, the Samsung sound bar model HW-F355 turned off.
    Immediately I stopped scanning and saved the code and start using the defected remote from GE to control my Samsung sound bar model HW-F355 and I programed another universal remote I had to control the TV.
    It continue working for 3 weeks and suddenly that defected remote got fixed by itself and stopped controlling the Samsung sound bar model HW-F355.

  7. Larry

    I have a Samsung Soundbar HW-A550 and a Spectrum Remote UR5U-8780L have tried numerous codes, both 4 and 5 digits. None of the codes work, need help. Thanks.

  10. Robert Horton

    Soundbar is a hw-jm46-za my remote control is a universal urc-r6 and I’m trying to program the soundbar with it but haven’t had any luck

  14. Jeffrey Trias

    Just installed the MS650 Soundbar. I can control audio with my Samsung TV Remote, but since installing the Soundbar, I no longer have total control over my tv. With Samsung Remote, I cannot view cable guide or change channels. The RC122 Cable Remote, before installing the Soundbar, I had total control of the tv! Now that remote controls the cable box and turns the tv on and off. Help!
    Samsung MS650 Soundbar.
    Samsung QLED QN5580RAFFXZA

  15. MARK WASMILLER

    Hello,
    I have a Spectrum UR5U-8780L-BHT universal remote and I’m trying to control a Samsung HW-J550. I’ve tried your codes listed and had no luck. Any help would be appreciated. Thank you!

  16. Cal Elliott

    I have Samsung Sound bar model HW-C450/XAA. Tried, unsuccessfully, all the 5-digit codes on your website to program my DISH remote 21.1. Sound bar is connected to TV via digital optical connection. No HDMI connection is available on the Sound bar. Please help with a code that works. Thank you.

  18. Lucia Di Carlo

    Bell receiver 9242 remote control and Soundbar Samsung HWJ250 I tried the codes you have posted. It does not work. Thank you

  22. Brad Mckinney

    Hello I have a Samsung sound tower model # TW-J5500 and i was trying to program my spectrum cable box remote control with remote control model # is 1060BC2/1060BC3 basically what i what to do is control my Samsung sound tower with my spectrum cable box remote i have contacted spectrum about this issue and they dont have codes for that model at all
    I just need those specific codes is all thank you

  23. Ralph

    Aloha,
    I have a Spectrum Remote Control: Philips RC122 and HW-Q90R Samsung Harman Kardon 7.1.4ch. The remote does not appear to take the 5 digit code.

  25. andy

    Remote control is 180552, samsung soundbar is hw-r40m, cannot pair them together, do you have the code for the remote?

  26. Ed

    Can I control the Samsung Soundbar HW-450 with a CL3 universal remote? The codes appear to be 4 digit only for the CL3 remote.

  27. Jeffrey Cawthon

    Hello I have a samsung HW-R550 and have tried all the codes to be able to control volumn and on-off.

  28. Ricky G.

    Trying to pair a remote Arris model URC 600 (Shaw Direct) AUX mode to a Samsung sound bar model HWF355 have tried your codes and manufactuers codes and even did code search with remote to sound bar nothing worked can you please help me ? Thanks

  29. Ravi Grewal

    Hello, I have a Samsung HW-M550 soundbar and would like to control it using a Champion URC2025B1 universal remote. Are you able to find the correct code?

  31. Sean

    Having an issue getting Samsung model PS – WM20 sound barcodes to work with my GE universal remote.
    Remote only accepts 4 digit codes for the sound bar.

  32. Stacie

    I have a Charter Spectrum remote model # 1060BC3, we have a Samsung sound bar model # HW-K550. I have tried all of the provided codes and nothing worked

  33. Jimmy Fish

    I need help programming a Samsung HW-H550 Soundbar on a RC65 remote control. I have a DTV Receiver Model # HR44/700. I’ve tried all of the obvious things.

  34. Elizabeth Cogley

    I have a Vizio TV (which probably doesn’t matter) a Samsung HW-M550 sound bar – and I am trying to control the volume of the sound bar with a RC66 DirecTV universal remote. I have tried EVERYTHING. Please help

  35. Scott Schneider

    I am trying to program my charter spectrum cable remote to my Samsung HW-H550 soundbar and I’m having no luck.
    I have tried codes.

  38. Jaso

    My sound bar won’t connect with the Samsung codes provide a here is my Samsung sound bar model number Hwjm37iza

  39. James

    Can’t get my samsung sound bar on my spectrum remote on aux. I have tried every code I can get my hands on and no luck!

  40. Rick

    I am trying to connect my soundbar to a Spectrum universal remote model number URSU-8780L-TWM
    It will not connect.

  42. Rosey

    Trying to sync SAMSUNG SOUND BAR model # HW-J355 OR HW-J355/ZA to the DIRECT TV Genie remote RC73.

    Can’t find the code. Please help!

  45. Andy OHalloran

    Have the Samsung model HW-D450 and my remote from FIOS is model RC1445302/04B and no codes work. Your suggested codes are 5 digits and this remote only takes 4 digits.

  46. James V

    Hi my soundbar isn’t listed above. I have the HW-KM45/ZA. I have it running through my Xbox ONE and if I use voice commands I can turn the volume up and down and even mute it, but can’t control the volume with my Xbox tv remote. I can turn the channel on my cable box and every other function just not the volume. So I was looking for the “audio receiver remote code” the xbox says they are usually 4 numbers sometimes with a ketter in front.

  48. Dan

    I have a samsung hw-hm45c soundbar. Trying to connect it to a spectrum remote UR5U-8790L-TWC. Thank you!

  49. Edward Harry

    I need to setup my Samsung Soundbar (hwk360) with Atlas DVR 5 device Universal Remote I have ywo Samsung 55 Curved 4K TV’s on the first one I was able to use this and the soundbar was set to use Bluetooth, and was just controlled as the TV speakers, however, with the new on (same model) to will not work, it is choppy or won’t work at all. followed the suggestions on Samsung’s page to hold down the power to reboot and start the system back up without releasing it, to no avail.
    It does provide sound with it set as Digital instead of Bluetooth. but it cannot be controlled by TV remote and the variance with sound in programming to commercials is extremely low.

  51. Raymond Park

    I have a Samsung sound bar Model # HW-FM45C and Spectrum cable remote #UR5U-8780L-BHT.
    Have tried various codes but unable to pair.
    Can you help please with the correct code.

  53. Edward

    Service: Comcast DVR (non-X1) silver remote
    TV: Samsung UN55D6000S (bought in 2012)
    Soundbar: Samsung HW-K360 (bought in 2016)

    Thanks, Dave, your setup worked fine for me. I had given up on this until I read your reply.

  55. Greg S

    Our AT&T unverse remote only accepts (4) digit codes. I am attempting to program a Samsung HW-HM45C to the AT&T Silver 10 remote AUX. Any help would be appreciated

  56. Kristine Albert

    Hey, this worked on my Spectrum universal remote as well, you saved my sanity thank you!

  58. Jacquie

    We are trying to activate our Samsung soundbar hw-hm45c to our spectrum remote f171407
    Also need to know what buttons to push to complete the pairing

  59. Janet

    I have Mitsubishi Universal remote control I need to program a 5 digit code to my samsung soundbar HWJM37 I tried the code listed for samsung soundbars on the website but none of them work on my remote control. Also I need codes Xfinity platform1 cable box.

  60. Dave

    I’d like to give back a little and provide a fix for linking up our Samsung audio soundbar and subwoofer – model HW-K360/ZA – to the directv remote.

    Our TV is a Samsung series H4500 TV, 28″ screen. I don’t know if this solution will work with other TVs like Vizio and LG, apart from a Samsung TV. My guess though is that it should work.

    First, you have your Direct TV remote programmed so it controls your TV.

    Second, hook up the Samsung soundbar to the TV with a Digital Toslink cable (not the hdmi connector nor analogue rca cables).

    Third, using the soundbar remote, turn the soundbar on.

    Fourth, using the soundbar remote, press the “Source” button until the LED display on the soundbar shows “D.IN”

    Fifth, using the soundbar remote, press the “left arrow” button and hold for 5 seconds, until the LED on the soundbar shows “ON – Auto Powerlink.”

    Sixth, using the sound bar remote, press the “Sound” button in the center and hold for 5 seconds until the LED on the soundbar shows “On – TV Remote.”

    Now the Directv remote should control the volume on the soundbar.

    Dave

    I don’t know whether this solution works with this

  61. Steve Chapman

    I am looking for codes for a Samsung HW-F355 for a Charter 1063 remote. please help.

  62. Mike

    Hi,
    I have the Samsung HW-J250 sound bar I need the code for UR5U-8780L TWC remote
    need program code any help???

  63. Beca M

    Looking for a 4 digit code for a Samsung sound bar model HW-F355 to pair up with a new Spectrum remote. Thanks!

  64. oSMAN

    how can i control Samsung HW-J355 2.1 Channel Sound Bar with RCA CRCR314WR

    I have tried all the above codes.

    Please help.

    Thanks

  65. Larry Maher

    I have a Samsung HW-KM45C Soundbar and a Directv RC66X remote. I tried your codes but they didn’t work. Any ideas?
    Thanks

  66. Luis

    Hey. Tried entering the codes provided for my new Samsung sound bar (HW-KM45C) To my Charter remote (1060BC2) but they are not working. Any suggestions?

  69. Jody

    Got a Samsung HT-WS1 Soundbar with a PS-WWS1 Sub..Can’t link sub to SBar…NO REMOTE…
    Can I use my Samsung Galaxy S 5 phone’s IR to do it…Or Panasonic N2QAYB000570 for plasma TV remote, or Directv remote RC23… .PS4 PS3 consolesjs it possible to link sub to phone..BLUETOOTH?
    I like to link bar to sub control volume

  70. Morgan

    I’m trying to program my Sharp Aquos tv remote with my Samsung HW-J370 soundbar. Anybody know the right code?

  71. Juan Delgado

    I have a samsung sound bar model hw-h450 need 4 digit code for a GE universal remote model 33709, tried the codes described in the manual to no avail.

  72. Tony Wartnaby

    I have a Samsung HW -F350 soundbar, and trying to use my Shaw Direct Satellite remote Arris URC 600 in AUX mode.
    I have searched the net and tried many many codes and also contacted my satellite provider (Shaw Direct) who gave me more codes to try.

  73. Pete

    I’m trying to get a Samsung Soundbar, HW-K360 to work with a TIVO “Peanut” remote. If it matters this is the Glo remote.

  75. Dlips

    HW-E450 Samsung sound bar with charter-urc1060 remote. None of the codes seem to work online or in the remote manual.

  76. Tony dempsey

    I could not get the codes above to work. I have a Samsung hw-k550 soundbar and a charter spectrum remote.

  77. Tommy

    I have a Samsung HT-X810 soundbar, but i can not find a code that works using my Chunghop L809 – universal remote. I need a 4 digit code. I set the remote to AUX mode when typing codes.

  78. Jorge Gonzales

    I have a sound bar Samsung Model HW-K550 and my remote control universal Sony model
    RM-VZ320, I tried the five codes with the button SAT/CBL, and it doesn’t work.
    Can you give the code?

  80. Steve Hahn

    I have a Samsung HW- E450 – trying to use a Verizon Fios – rc1445302 / 03b remote – 4 devices – uses only 4 digit codes not 5, please help!

  84. Joe

    I have a Samsung hw-f355 sound bar. I need a 3 digit code for an Atlantic broadband remote model # ur5u-9000L-AB

  85. Remote Control Codes

    Curtis Allen,
    For a RC65 DirecTV remote to control a Samsung Soundbar use the remote code 10812.
    If that does not work, try using remote code 12051.
    -CUR

  86. Curtis Allen

    I’m trying to link my new soundbar to my DirecTV remote.
    Samsung soundbar HW-K450.
    Direct tv remote RC64R.
    I’ve tried over 65 codes, no success….

  89. Wil G

    I am looking for the 5 digit code for my Samsung HW-J250 soundbar. I have a Charter Spectrum remote (model 1060BC2 / 1060BC3). Please help! Thanks!!!

  91. Jay Vee

    I am looking for a code for HW-HM45 that is compatible with Charter Spectrum 1060BC2/1060BC3. Let me know if you find anything.

  94. David Hilleman

    I have a Universal Electronics C4000 remote through Charter. I’m trying to program a Samsung HW-KM45C sound bar and my remote recognizes the 20045 code but the volume control on the remote still does not operate. This is very frustrating and I hope I can find an answer.

  96. Jim Smith

    Looking for codes for a Samsung HW-J355 to use with a GE universal remote using CL3 4 digit codes. 0075 is not working

  97. Dave T

    Do you have universal code for Samsung KW450 soundbar? I am using FIBE remote (Bell) Toronto, Canada.

  98. Bryan Wellington

    I need to know the remote codes for Samsung sound bar model number hwh450 using dish remote 40.0 uhf 2g.

  101. Ashley Jimenez

    Universal Remote GE 30758-cl3 1603
    SoundBar Samsung hw-j355
    I have tried every number I could find… Remote takes 4 digits.

  102. BruceC

    I have a HW FM55C Samsung soundbar.
    Using a Dish Remote 20.0 IR.
    Attempting to set up remote using ‘aux’ button and codes provided on this web page.
    Dish appears to only use 3 digit codes not the 5 digit provided.

  103. sulabh

    I have Samsung sound system SPS-3510 (very old) and my remote controller is missing and not available in the market..
    Remote model : AH59-01149A

  104. Rhonda

    GE universal remote 24922 or UR5U-8780l-twm for Time Warner remote.
    Samsung k450 k series sound bar. Would be great to find a working code and/or remote that will work!

  108. Remote Control Codes

    Beth Ginsburg,
    To use your Xfinity VOICE remote to operate your Samsung Soundbar:
    -Turn on the Samsung sound bar you are programming.
    -Press and hold the “Setup” button until the status LED at the top of the remote changes from red to green.
    -Type in the Samsung Sound Bar code 31868, or… 31950, 32660, 31949, 32137, 31304.
    -If the code is entered correctly, the status LED will flash green twice. If the status LED blinks red, then green the code was not entered correctly.

    -CUR

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.