BOSE Soundbar Remote Control Codes

If you have a BOSE Sound Bar and want to control it with a universal remote control, we have the codes needed. A BOSE soundbar can be controlled with any universal remote if you have the correct programming guide and the correct remote codes for the sound bar. If the codes below do not work with your BOSE sound bar, please leave a comment below with the model number of your remote control and we will find you the correct remote code.

Bose Solo SOUNDBAR TV Remote Codes

Program your universal remote control to a BOSE Sound Bar, SOLO, or Wave. Use the following 4 and 5 digit remote codes.

BOSE Sound Bar Solo 4 Digit Remote Control Codes:

BOSE Sound Bar Solo 5 Digit Remote Control Codes:

NOTE: Go into the menu of the Bose system and change the settings so it can receive infrared remote IR commands.
Bose systems are set to RF commands by default.

All remote codes reported working with the following BOSE Audio: Solo 15, Wave Radio, etc…
These codes have been tested with the XR2 Remote, Comcast, Harmony 650, etc…

To control other components with your Bose Remote, check this PDF file for…

Bose Sound Bar Audio SystemsBose Sound Bar Audio Systems

Need more help programming your remote to your BOSE soundbar? Please leave questions below.

Related Content That May Also Assist You:

{ 8 comments… read them below or add one }

Ryan July 30, 2017 at 3:29 pm

I cannot get my “BOSE SOLO 5 TV SOUND SYSTEM” to work with Universal Media Remote for PlayStation 4


Linda Sorsen June 4, 2017 at 9:39 pm

We have a Summit TV in our RV. can you give me a code for my Bose 5?


John S. March 18, 2017 at 1:47 am

I have Direct TV and my remote is a RC66.
I just bought a Bose SoundTouch 300 and want to control it with the Direct TV remote.
If you have a code that will work?


Kevin Smith March 5, 2017 at 2:25 am

I have an AT&T Uverse Silver Remote. I need a 4 digit device code to program it to control the volume of the Bose Solo 5. I tried the 4 digit codes listed above, and none worked.


Charlie C. October 30, 2016 at 9:19 pm

I want to control the dialogue function on my BOSE Solo 15 soundbar using my Xfinity XR11 remote.
I already have the Xfinity remote setup to access on/off and vol up/down on the Bose.
How do I “map” a button on the Xfinity remote to the dialogue function on the Bose?
Any assistance would be greatly appreciated.


Remote Control Codes November 5, 2016 at 12:38 am

Charlie C,
If you want the ability to remap, you’ll have to use one of the older model Xfinity remotes.
Get the old XR5 (or similar) version remote off of eBay as they are only a few bucks.
The older remote also does activity macros so you never have to scroll through inputs.


Gilles Brissette August 26, 2016 at 3:12 am

Looking for codes to control a Bose Solo 5 Sound system from this remote : RT-U63P-15 (Cable Videotron).
I have tried, without success, all the 4 and 5 digits codes listed above.


Remote Control Codes August 27, 2016 at 10:38 pm

Gilles Brissette,
Try using the Videotron REMOTE Support page as there are multiple ways to program the remote for a Bose Solo 5.


Leave a Comment

Previous post:

Next post: