Sceptre Soundbar Remote Control Codes

If you have a Sceptre Soundbar and want to control it with a Universal remote control, Cable remote, or SAT remote, we have the remote codes that will make it work. A Sceptre soundbar can be controlled with any universal remote control if you have the correct programming guide and the specific remote codes for the soundbar. If the codes below do not work with your Sceptre soundbar, please leave a comment below with the complete model number of your remote control and model number of your Sceptre soundbar and we will find you the correct remote code.

Sceptre Soundbar Remote CodesSceptre Soundbar Remote Codes

Program your universal remote control to an Sceptre Soundbar.
Use the following 5 digit remote codes.

Sceptre Soundbar 5 Digit Remote Control Codes:
10000
10878
11217
11360
11599

If these remote codes do not work, try the code search on your CAB or SAT remote…

Code Search using Comcast Remote Control:
– Turn on your Soundbar
– Press Aux once
– Press and hold Setup until the key blinks twice
– Release Setup
– Enter 9 9 1 3 or 9 9 3
– The Aux key will blink twice
– Press Power and aim the remote control at the soundbar
– Press CH+ until the soundbar turns off
– In the code search mode, the remote control will send IR codes from its library to the selected device.
– Press Setup once to lock in the code
– The Aux key will blink twice

Code Search using DIRECTV Remote Control:
– Turn Soundbar ON
– Volume up but MUTED
– Press AV1 or AV2
– Press and hold MUTE and SELECT for 2 blinks
– Enter 9 9 1 and wait 2 blinks
– Enter 3
– Press and release VOL UP
– Point the remote at the soundbar and keep pressing and releasing the CH UP key
– When the volume changes, press SELECT to lock in code

The above CODE SEARCH (Remote Control Programming) methods are written for Comcast and DIRECTV remotes but can be used and tried with ANY universal remote. The code search methods above are examples of how to get your current remote to control your Sceptre soundbar.

Need more help programming your Universal or CAB SAT remote to your Sceptre soundbar? Please leave your questions below and we will be happy to assist.

4 thoughts on “Sceptre Soundbar Remote Control Codes”

  1. I also have a Sceptre SB80 sound bar.
    I have tried these remotes:
    GE 6-Device Universal Remote Control, Backlit, Silver, 33712
    I have also tried two different RCA remotes

    any codes?

  2. Hello,

    I have a Sceptre Speaker Soundbar 2.1 (SB301523). My universal remote (GE 33712) accepts 4 digits codes only. Do you know of any that work?

    Kind regards,

    Michael

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.