Samsung Soundbar Remote Control Codes

Looking for Samsung Soundbar Remote Codes? If you have a Samsung Sound Bar and want to control it with a universal remote control, SAT, or CABLE TV remote, we have the codes needed.

Remote Control Codes For Samsung Soundbars

Remote Control Codes For Samsung Soundbars

A Samsung soundbar can be controlled with any universal remote or CABLE/SAT remote if you have the correct programming guide. You also need the correct remote codes for the sound bar which can be found below. If the codes below do not work with your Samsung sound bar, please leave a comment below with the model number of your remote control and the model number of your soundbar and we will find you the correct remote code.

Program your universal remote control, Cable remote, or SAT remote to a Samsung Sound Bar. Use the following 5 digit remote codes…

Samsung Sound Bar 5 Digit Remote Control Codes:
32609
22609
32660
31949
21014
20045

All remote codes above are reported working with the Samsung Soundbar Model Numbers: HW-FM55C, FM550, HE550, HW-HM45, F550, J450, HW-E450, HW-J450, HW-J650, HW-F450, WH-E450, HW-J355, HW-D450, HW-H550, HW-H7500/ZA, and HW-HM55C.

These codes have been tested with the Comcast remote controls, Xfinity, DirecTV, DISH, COX, Verizon Fios, and many more.

HINT: Use your Cable, SAT, or Universal remote control in “AUX MODE” to control your Samsung Soundbar.

Note: If you have a Samsung TV, the Samsung Soundbar should automatically PAIR to the TV and the Samsung TV remote should control the sound for both the TV and Soundbar. It connects wirelessly on some models.

Need more help programming your Universal or CAB SAT remote to your Samsung soundbar? Please leave your questions below and we will be happy to assist.

104 thoughts on “Samsung Soundbar Remote Control Codes”

  1. I am trying to program my charter spectrum cable remote to my Samsung HW-H550 soundbar and I’m having no luck.
    I have tried codes.

  2. My sound bar won’t connect with the Samsung codes provide a here is my Samsung sound bar model number Hwjm37iza

  3. Can’t get my samsung sound bar on my spectrum remote on aux. I have tried every code I can get my hands on and no luck!

  4. I am trying to connect my soundbar to a Spectrum universal remote model number URSU-8780L-TWM
    It will not connect.

  5. Trying to sync SAMSUNG SOUND BAR model # HW-J355 OR HW-J355/ZA to the DIRECT TV Genie remote RC73.

    Can’t find the code. Please help!

  6. Have the Samsung model HW-D450 and my remote from FIOS is model RC1445302/04B and no codes work. Your suggested codes are 5 digits and this remote only takes 4 digits.

  7. Hi my soundbar isn’t listed above. I have the HW-KM45/ZA. I have it running through my Xbox ONE and if I use voice commands I can turn the volume up and down and even mute it, but can’t control the volume with my Xbox tv remote. I can turn the channel on my cable box and every other function just not the volume. So I was looking for the “audio receiver remote code” the xbox says they are usually 4 numbers sometimes with a ketter in front.

  8. I have a samsung hw-hm45c soundbar. Trying to connect it to a spectrum remote UR5U-8790L-TWC. Thank you!

  9. I need to setup my Samsung Soundbar (hwk360) with Atlas DVR 5 device Universal Remote I have ywo Samsung 55 Curved 4K TV’s on the first one I was able to use this and the soundbar was set to use Bluetooth, and was just controlled as the TV speakers, however, with the new on (same model) to will not work, it is choppy or won’t work at all. followed the suggestions on Samsung’s page to hold down the power to reboot and start the system back up without releasing it, to no avail.
    It does provide sound with it set as Digital instead of Bluetooth. but it cannot be controlled by TV remote and the variance with sound in programming to commercials is extremely low.

  10. I have a Samsung sound bar Model # HW-FM45C and Spectrum cable remote #UR5U-8780L-BHT.
    Have tried various codes but unable to pair.
    Can you help please with the correct code.

  11. Service: Comcast DVR (non-X1) silver remote
    TV: Samsung UN55D6000S (bought in 2012)
    Soundbar: Samsung HW-K360 (bought in 2016)

    Thanks, Dave, your setup worked fine for me. I had given up on this until I read your reply.

  12. Our AT&T unverse remote only accepts (4) digit codes. I am attempting to program a Samsung HW-HM45C to the AT&T Silver 10 remote AUX. Any help would be appreciated

  13. Kristine Albert

    Hey, this worked on my Spectrum universal remote as well, you saved my sanity thank you!

  14. We are trying to activate our Samsung soundbar hw-hm45c to our spectrum remote f171407
    Also need to know what buttons to push to complete the pairing

  15. I have Mitsubishi Universal remote control I need to program a 5 digit code to my samsung soundbar HWJM37 I tried the code listed for samsung soundbars on the website but none of them work on my remote control. Also I need codes Xfinity platform1 cable box.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.