RCA Home Theater Universal Remote Codes | Codes For Universal Remotes

RCA Home Theater Universal Remote Codes

RCA Home Theater remote codes. If you trying to control your RCA home theater with a universal remote control, here are the remote codes to operate your RCA. If the first codes do not work, keep trying the numbers down the list.

RCA home theater remote codesRCA home theater remote codes

Most common remote codes for RCA Home Theater:
Audio = 1254, 2154, 1913
Video = 1022, 1060, 1132

Please try the following remote codes with the unit turned ON to test if the unit will power OFF.
5 digit remote codes for RCA home theaters: 64257, 31254, 18192, 51472, 18704, 51216, 18448, 19216, 51728, 18960

Test the RCA Home Theater in Audio mode using 1254 as the setup code. Press Setup once and enter the 51988 code. The remote will send the IR signal. Holding the 5th digit will cause the signal to repeat and this should turn the volume down.

If you have issues finding the correct code for your remote to control your RCA home theater, let us know by leaving a comment below and we will assist.

42 thoughts on “RCA Home Theater Universal Remote Codes”

  1. Do you have four digit codes for an RCA 37″ 5.1 Channel Home Theater Sound Bar with Subwoofer & Bluetooth
    RCAModel: RTS739BWS
    I have a Dish 54.0 Voice Command Remote Control for Hopper

  2. Quentin Marquis Eleby

    I’m trying to program a RCR414BHE remote to a RCA RT2280 any help would be appreciated!!!

  3. I have RCA sudio receiver model no.: RT2770R. But the remote control broke down and I replaced it with universal remote control. My problem is the code in the remote manual is not working. Please help! Thank you!

  4. Hi, I have a RT2500 receiver RCA Home Theater System. The original remote, (RCR 192 AD2) I DO NOT have of course. Problem is I can not power on my receiver. I believe it is in STANDBY mode when I plug it in. It will not turn on by the power button on the receiver itself and the two remotes that I have tried has failed. Both the “RCA” model RCU400 3402BB and a “One For All” universal model (URC 7880). Please help me?
    I really could use a code that works or some sort of solution to my problem.
    Is there a way to power it on without a remote?
    Is it possible to reset the receiver?

  5. I’m not sure on how to do the first step with the 1254 code setup , and none of these code seems to work. Someone help me?

  6. Have a GE universal remote I got it hooked up to DVD RCA surround sound. But can’t control sound on remote. I can the DVD player can turn on and off movie but not the device.

  7. I’m trying to use my Charter remote to operate a RCA RT151 speaker system and I can’t find a code that works.

  8. I have an RCA Sound bar Model #rts7010bge6, and I am using a GE universal remote #33712. I have done both manual and automation code searches, but nothing works.

  9. I have an rca sound bar, model # rts7113ws. Trying to program a charter spectrum remote. Charter OCAP 4 device remote control.

  10. I can not get a code that works with my RCA home theater system rt2781h or VTRRT2781H for Directv universal remote RC65.
    I have tried all codes from DIRECTV and all other codes I found that said they may or should work to no avail, If you can be of any help I would greatly appreciate it.

  11. Hi I have a rca rt2380bk receiver that I’m trying to control with my Directv remote but none of the codes are working, please help

  12. Shonnie L Shipp

    I have a Rca rtb1024 blu-ray home theater system I need the code to program my universal remote.

  13. Can not program my Directv remote (rc65) for me new rca rt2781hb. Tried all codes provided plus 991 with 30 minutes of tries…..help!


    Trying to get a code for a rca home theater model RTB 10220. I got a direct tv remote to work the volume but that’s the only thing it will operate. I also have a 4 digit GE universal remote but having no luck.

  15. I am trying to program a Directv universal remote control model RC66RX to control an RCA MODEL RT2781HB home theater system.
    None of the codes I have found works with the Directv Remote.
    Do you have a code that I might Try?

  16. I have a brand new RCA 5.1 audio receiver model number RT2781HB.
    I have tried all of the DirecTV codes to control power and volume with DirecTV Remote Model number RC65RX.

    1. Remote Control Codes

      CG Blade,
      For RCA 5.1 audio receiver, try the remote codes: 1023, 1609, 1254, 0080, 0531, 1074, 1390, or 1511.

  17. I have directv w/ remote RC73, genie
    The tv I have is, sharp LC-55N6000U.
    I am trying to get remote code for RCA RT2781HB home theater receiver.

  18. Need code for Charter OCAP Universal Electronics to control RCA Home Theater RTS7010B.
    Has to be a 5 digit code.
    All that start with 5 or 6 error out.

  19. I have a RCA blue ray home theater system rs281jd130530 and I lost the remote I bought a GE unvirsal but none of the codes are working.

  20. Recently purchased an RCA sound bar item RTS7010B. hooked it up OK, but would like to pair with my Entone cable remote so that I don’t have to use two remotes. My cable provider says the AUX button will allow this, but I need the “code”. My question is what is the 3, 4 or 5 digit code, or where can I find it.

  21. I also have the RCA RTD 315 Surround Sound with DVD player. We lost the remote and not one of the codes has worked on our Wow cable universal remote or the RCA universal remote I just purchased.

  22. I have a rtb103w3lw RCA home theater blu ray player, but lost the remote.
    I am trying to program a GE Universal remote but no codes are working what can i do?

  23. I am trying to get an RCA 192 aa9 remote to work with an inteset 422 remote. I tried the above codes (inteset only uses 5 number codes) and was not able to get them to work. I at least want to get the audio control to work for the optical input from my tv.

  24. Have RCA home theatre system RTD315 trying to program GE universal remote 24922 to it. All codes I found will not work.

  25. Tony Gregoire

    I’m trying to setup a remote for my RCA home theater system it has a DVD player as well and I can’t get it to work with the codes I have. Can I get help getting it set up please?

    1. Remote Control Codes

      Tony Gregoire,
      Can you tell us the model number of your RCA home theater system with a DVD player?
      Once we have the model number we can assist.

      Try these codes for RCA Home Theater with DVD….
      Most RCA home theater systems will respond to Audio 1254 and to Video 1022, 1060, or 1132.
      If you can get a response from any button then you will be able to get everything working.


  26. Priscilla Corley

    Just bought RTB10323LW, trying to use DirecTV Tivo remote. Can’t find it by searching, but this system is replacing an RCA bluray home theater, & this same remote worked for it.

  27. I have an RCA RT2390 Home Theatre System that I am trying to operate using a One For All universal remote (URC-5600B00) I have been searching on line for codes and have tried about 30 or more different codes with no success. Can you please help.

    1. Remote Control Codes

      Dave F,
      Have you tried 3, 4, and 5 digit remote codes?
      For Audio try 1254 or 11254
      For Video try 1022, 1060, 1132, or 11022.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top