Remote Control Codes For Supersonic TVs









Supersonic TV remote codes. Here are universal remote control codes to use with your Supersonic TV. Program Your Cable or Satellite Remote Control to work with Your Supersonic TV. Check with your cable or satellite provider for instructions. You can program your universal remote control to also control your Supersonic TV.

Remote Control Codes For Supersonic TVs

Remote Control Codes For Supersonic TVs

Supersonic makes TVs from 13.3 inches to 40 inches. Many of the televisions Supersonic makes are for RV’s. Many of these TVs are AC/DC Compatible for RVs. The 13.3 inch TV, 15.6 inch TV, 19 inch TV, 22 inch TV, and 24 inch are AC/DC compatible. NOTE: The 39 inch TV and the 40 inch TV are NOT AC/DC compatible. If you have an RV TV, you can still use the remote codes provided.





SuperSonic TV Remote Control Codes

Supersonic TV Remote Control Codes

0208
0556
0698
0264
0805

Need your Supersonic TV Owners Manual? Supersonic TV Manuals

ON MOST REMOTE CONTROLS:
1. Turn on the Supersonic TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 4 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 4 digit code.
6. The button will blink twice to confirm the code is stored.

Need help finding a remote code for your Supersonic TV? Please leave a question below and we will find you the code.


Related Content That May Also Assist You:












{ 17 comments… read them below or add one }

David Horwitz May 23, 2017 at 12:58 am

Universal Remote provided by Time Warner Spectrum
UR3-SR3M-TWC

Supersonic 13.3 ” Model SC-1311

Need codes to sync Supersonic TV to remote

Reply

Miranda Richards April 28, 2017 at 2:19 pm

I have a Emerson tv 32 in. The codes to the supersonic remote does not work.

Reply

David February 1, 2017 at 8:37 pm

I have a Steren model RM-4 universal remote that uses 3 digit codes. Is there a 3 digit code for the 13 inch TV?

Reply

Diane Carter December 18, 2016 at 1:33 am

Need Dish remote code for Supersonic SC-2412

Reply

JD November 29, 2016 at 1:59 pm

Supersonic TV SC-7377, Comcast Cable using the Xfinity Digital Remote. Can not find code that will work, can you help?

Reply

D Campbell November 29, 2016 at 12:07 am

What is the ATT remote access code for AT&T remote control S30-S1B for the 24inch SuperSonic TV model SC-2412. AT&T suggested access codes of 13154,12104,13204 do not work. AT&T says to obtain the set up code from SuperSonic.

Reply

joe lloyd November 26, 2016 at 6:16 pm

What is remote code for Supersonic SC-2412

Reply

GEORGE November 11, 2016 at 11:20 pm

I have an RCA universal remote ( RCU704SP2D ) what code do I need to use it on my supersonic TV ?

Reply

Denise October 31, 2016 at 10:05 pm

I bought the Supersonic SC-1511, remote is RC122 (Time Warner/Spectrum). Is there 1 code for this combo?

Reply

Diana Trautwein September 4, 2016 at 1:59 am

I have the same issue as Dean Holte and I have tried all of this codes with no success. Any other suggestions? When I initially set up the Cox Mini Box, the remote worked for changing channels. About 24 hours later, it stopped doing anything at all.

Reply

Chris July 31, 2016 at 8:37 pm

I can’t get my cable remote to work with my 13 inch supersonic tv. I tried all of the codes.

Reply

Remote Control Codes August 2, 2016 at 9:17 pm

Chris,
What is the cable remote model number?
-CUR

Reply

David Hreniuk July 17, 2016 at 12:57 pm

I purchased a Supersonic sc-1311 and have been unsuccessful in getting the correct code that will allow Xfinity’s XR2 remote to control power “on” and “off” and volume. Xfinity’s remote guide does not list any codes for Supersonic TVs.

Reply

Remote Control Codes July 18, 2016 at 7:35 pm

David Hreniuk,
Try checking the Xfinity XR2 forums for codes as Xfinity does not list any Supersonic TV codes in its database.
-CUR

Reply

Bertilla Thompson February 8, 2017 at 1:35 pm

I am having this same problem… has anyone had success in pairing the COMCAST remote to turn the TV on and off?

Reply

Dean Holte June 10, 2016 at 7:12 am

From Amazon I Purchased a Supersonic sc-1312 and have been unsuccessful in getting the correct code that will allow Cox Cable’s urc-2220-r to control power “on” and “off” and volume. Using Cox’s remote control setup brochure for their mini box, I tried code 2104. On the Internet, I found codes 0208, 0556, 0698, 0264, 0805 for this TV. None worked. I have successfully set up 2 other Cox mini box remotes with other TV’s, so I don’t think I am doing anything wrong.
Are there other codes I should try? It really is a pain to have to use 2 remotes to operate the TV. I am using HDMI as the source.

Reply

Remote Control Codes June 10, 2016 at 4:59 pm

Dean Holte,
2104 is the main remote code for the Cox remote URC-2220 to program a Supersonic TV. Try using 0864, 1627, 1755, 2049, 1330, 0885, 1564, 1742.
Let us know if any of these codes have worked.
-CUR

Reply

Leave a Comment

Previous post:

Next post: