Magnavox DVD Remote Control Codes







Magnavox DVD remote control codes. If you have recently bought a universal remote control and you need the remote codes to operate your Magnavox DVD, we have the remote codes below that will work to program and control your Magnavox DVD. If the first code does not work, keep trying the numbers down the list and you will find one that will work with your Magnavox DVD.

Magnavox DVD Remote Control Codes

Magnavox DVD Remote Control Codes
162
0915
0914
0969
0408
0979
0981
0980
0456

ON MOST REMOTES (Generalized):
1. Turn on the Magnavox DVD.
2. Press and hold the DVD and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the DVD and enter the DVD’s 3, 4, or 5 digit code.
4. Verify by pressing the PLAY button.
5. Press the DVD button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.



Do you have any other codes to add to the list for Magnavox DVD remote codes? Please leave a comment below.







{ 1 comment… read it below or add one }

John Sims March 18, 2019 at 4:18 am

I have recently purchased a Magnavox MTFT750 portable DVD player off the net. I live in Australia, which uses the PAL system. On the settings menu of the user manual I downloaded, there is an option to set NTSC/AUTO/PAL for the player. The manual says its region is 1. Could the region code be changed to 4 (Australia) or all regions?

Reply

Leave a Comment

Previous post:

Next post: