If you have a SONY Sound Bar and want to control it with a universal remote control, we have the codes needed. A SONY soundbar can be controlled with any universal remote if you have the correct programming guide and the correct remote codes for the sound bar. If the codes below do not work with your SONY sound bar, please leave a comment below with the model number of your remote control and we will find you the correct remote code.
SONY Sound Bar Remote Control Codes
Program your universal remote control to a SONY Sound Bar. Use the following 4 and 5 digit remote codes.
SONY Sound Bar 4 Digit Remote Control Codes:
SONY Sound Bar 5 Digit Remote Control Codes:
All codes reported working with the…. SONY Soundbar HT-CT60, HT-CT260, Sony STR-K700, Sony HTCT260, HTCT660, Sony CT-660, Sony CT770, SA-CT60, HT-CT260H, and HT CT150.
These codes have been tested with the… Comcast remote controls, U-verse remote, S10-S4, HR24-500, RC65RX, etc…
Using a Comcast Remote?
Press AUX, Code 31759, and POWER or -> PLAY
Using ATT U-Verse Remote?
-ATT/OK – 955 – ENTER (Will change to volume follows mode button)
-ATT/OK – 955 – AUX – ENTER (Will change to ALWAYS control Sony)
What about power ON OFF?
-ATT/OK – 977 – ATT – TV – AUX – ENTER (Will add aux to power sequence)
(Note that ENTER is on bottom right (Not the OK button)
Program – ATT/OK – 955 – ENTER.
In att mode set the STB sound to 15.
Set TV sound to a comfortable level
Set soundbar sound to a comfortable level.
Program your U-verse remote control using the setup tool to assist with programming your SONY soundbar.
Need more help programming your remote to your SONY soundbar? Please leave your question below.