If you have recently bought a universal remote control and you need the remote codes to operate your Westinghouse TV, we have codes below for your TV that are working. These codes will work with all universal remote controls. If the first does not work keep trying the numbers down the list.
The following 5 digit codes will work with your Westinghouse TV.
Codes listed with an asterisk (*) are possible alternate codes for your TV. These alternate codes should operate the primary functions of your device in most cases (Power, Volume Up and Down, Mute).
Directions to get remote codes to work on Westinghouse TVs:
2. Press and hold MUTE & SELECT for two blinks
3. Enter 9 9 1, wait two blinks
4. Enter 1
5. Press and release VOL UP
6. Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes
7. Press select to lock in code
Some remotes may require you to first switch to TV mode by first pressing the TV key to switch modes. You can then use the POWER or VOLUME keys to see if the television already works with the remote.
Many remote controls will search sequentially for a compatible set of commands. This is the simplest way to program a remote to operate with Westinghouse models. See the particular device instructions for an appropriate sequence of keystrokes.
Learning remote controls are able to capture commands from Westinghouse remote controls. Some are limited to a single command and others can group commands together.
Basic Remote Control Setup Instructions
Set the “Mode” to TV.
Press and hold the “Mute” button and the “Select” button until the visible LED blinks twice.
Enter the 5 digit Code above.
Are we missing a remote code for Westinghouse TVs? Let us know or if you have issues ask a question below.