Remote Control Codes For TCL TVs

TCL TV remote codes. Here are remote codes to use with your TCL TV. Program Your Cable or Satellite Remote Control to Work with Your TCL TV. You can program your cable or satellite universal remote control to also control your TCL TV. Find for your provider and remote control in the list below and enter the TV code provided into the remote control. Check with your cable or satellite provider for instructions.

TCL TV universal remote control codesTCL TV universal remote control codes

Universal Remote Codes for TCL (Roku) TV

ATT Uverse = 1346
Bright House Cable = 1756
Cablevision = 031
Charter = 11756
Comcast = 11756
Cox = 1756
DirecTV = 11756
Dish Network = 535
ONN = 3851
RCA = 11756
Time Warner = 387 or 1566
TIVO = 0091 or 0366
Verizon = 180

TCL TV remote codesTCL TV remote codes

Logitech Harmony Remote =
The remote control’s channel control capabilities are locked to the Cable Box.
This is so you do not inadvertently change a channel on the Cable Box while in the TV mode.


TCL Remote Codes for cable and SAT 1TCL Remote Codes for cable and SAT 2TCL Remote Codes for cable and SAT 3TCL Remote Codes for cable and SAT 4TCL Remote Codes for cable and SAT 5

If the codes you need to control your TCL HDTV, please let us know below and we can provide more remote codes for your specific remote.

Universal Remote Controls and Replacement Remotes
Universal Remote Controls - Replacement Remote Controls

Related Content That May Also Assist You:

{ 53 comments… read them below or add one }

Kirill April 21, 2017 at 2:43 pm

Im trying to conect my Bose® RC-PWS III to my 55′ TCL roku tv. 55up130. I just have an antenna I do not have cable or any other boxes. what would my code be since it’s only an antenna?


Sarah Lacey April 10, 2017 at 2:57 pm

My remote control for my TV TCL 22B33H is not working. I have bought a Grundig Universal Remote Control 7 in 1 (RC-7-1) which seems to have a code for all TV’s other than TCL TV’s. Are you able to provide me with a device code or an automatic way of getting it to work?


Jesse Sauve April 10, 2017 at 12:32 am

I have a TCL Roku 2016 Model TV, and I have a Samsung Blu Ray Remote Model # AK59-00149A
From what I have read I need 2 digit codes that I enter while holding down the Power Button (No idea how long prior to entering the code I should hold it)
So if anyone has any 2 digit codes that would help that would be just splendid!
The Tiny Roku Remote was a joke.
I am sure and I am not doltish enough to pay close to $160 for all cable channels when I could use 3 apps that cost between $30-$80 for up to if not more channels than cable companies offer and much cheaper Obviously!
So I do not have a Cable remote and I would love to use just one remote.
Samsung Blu Ray remote works great so I would love to use it for everything and only codes I am lacking is for the TCL Roku TV and My Phillips TV!


Sherry Johnson March 29, 2017 at 1:10 pm

I have a Sony universal remote and I need to know if I can reprogram it to my TCL Roku smart TV and I need the codes. Could you please send them to me.


Philip Mineer March 1, 2017 at 5:44 pm

I am using a Sony rm-adp111 remote for my bluray player. I can not find a code for my TCL TV that works with any Sony remote.


Breeanna February 9, 2017 at 2:30 am

I need a remote control code for my TCL Roku TV using an RCA RCR314WZ remote control.


Remote Control Codes February 9, 2017 at 8:58 pm

Have you tried all of the remote codes above for TCL ROKU TVs?
If no codes work, remove the first number on the remote code to see if it will accept the remote code.


James January 28, 2017 at 1:23 am

I am trying to find the code for the Universal Media Remote for PS4. I have had no luck finding one. Remote model is 051-038-NA.


jeff December 22, 2016 at 2:27 pm

I have lost my remote for TCL TV E3550 model, what would be the right code for this model?


Greg Moody December 4, 2016 at 7:24 pm

I just have a TCL TV.. no Roku or whatever that is.
These instructions say this Xfinity is LOCKED to a CABLE box.
I do not have cable.
I use rabbit ears to get TV over the airwaves.
How can I unlock and use this remote.
It just arrived in the mail … I do not remember the advertising for it saying it was locked to a cable box.
I tried the setup/tv button then 990 but get nothing except one blink and it is NOT three seconds later.


clarissa November 30, 2016 at 4:33 am

I need a code fo TCL TV my remote is keyin RM 133E . 3 digits code only. thanks!!


Rob Harman November 24, 2016 at 7:56 pm

I need the code to program my Mediacom remote to work with my TCL Roku TV.
They provided me with three codes (1246, 0083, 0368) none of which work.


Adam Hagenbach November 22, 2016 at 10:22 am

GE universal remote from Lowe’s for $10.
I can’t find Any codes to input?


Remote Control Codes November 22, 2016 at 10:51 pm

Adam Hagenbach,
Be sure you are pressing the correct buttons on your GE remote when you program it to work with your TCL TV.
Check the manual that came with it or give us the model number of the GE remote and we can assist.


Dougie November 1, 2016 at 1:15 am

For an Xfinity X1 remote, this was the easiest way for me to program the X1 remote to the TCL Roku TV.
I have the 55 inch 4k Roku TV set.
These are easy instructions and quicker than googling everything for hours.

Manual X1 remote setup

-Press and hold the setup button on the bottom left of the remote.
-When the red light turns green, release the button.
-Enter the numbers 991 on your remote.
-The light on the remote should blink.
-Slowly push the Channel Up on your remote until the television turns off.
-For me, it took 4 presses of the channel up. It was the same on the extra remote as well.
-When the set turns off, press the setup button one more time.


shipleybk October 9, 2016 at 6:13 pm

I have a TCL tv S series 55US57,
and am I’m trying to program my Dish Network remote 40.0 UHF 2G
EchoStar 186228,
Please advise me on a correct code for my Dish remote to work your TCL tv.


Denise Torok September 4, 2016 at 1:57 pm

I have WOW cable and do not see this provider on your list for codes. Any way to add it so I can program my remote to work with my TCL Roku TV 55US5800?


Tom July 16, 2016 at 4:30 pm

I have a Onkyo RC-897M control. I would like to pair it with my Roku 3 and Samsung 6-series, 6300.


David July 12, 2016 at 4:03 pm

I own a TCL LCD TV, model: L32M11HD. (Australia).
The remote control fell to bits!, so I bought a universal remote control: Audiosonic JLR-6002 Made in China.
I tried many times to tune my TCL TV to said remote, with no results whatsoever.
Are you able to advise me as to whether said remote can work with my TCL TV?


Remote Control Codes July 12, 2016 at 6:12 pm

You should be able to AUTO PROGRAM your Audiosonic Remote to your TCL TV.

– Manually turn on the television.
– Point your Audiosonic remote control to the tv.
– Press and hold the TV button, keep pressing.
– Press and hold the power button.
– The red light will come on and stay on.
– Release the two button and the Red light will stay on.
– Press the power button repeatedly until your device turns off.
– Once the device turns off press the STOP button so that you store the code in your remote.



Bob July 10, 2016 at 6:15 pm

I have a 40FS3800 Roku TV and need the 4 digit code that will work with the New Dish 52.0 remote for a Wally mobile receiver. All 11 pre-loaded codes in the Dish software did not work. Nor did code 1756. Can’t use code 535 or 556 since it is asking for a 4 digit code.
Can you assist please?


Remote Control Codes July 11, 2016 at 5:06 pm

Try using the ROKU supplied code 535 but put a zero in front of it, like this: 0535
If that does not work let us know and we will research further.


Tara June 19, 2016 at 10:36 pm

I have TWC and a TCL TV. My remote is an RC122 and I have tried the codes and cannot get my remote to work for my TV. Any advice?


Remote Control Codes June 20, 2016 at 6:49 pm

Since you have a Philips RC122 remote (most likely with Time Warner Cable)
Try programming the remote in AUTO CODE SEARCH MODE.

Here is how…
– Turn on the TV that you want the remote to operate.
– On remote press the TV and the SELECT/OK buttons simultaneously until all the device buttons blink twice.
– Point the remote control at the device and press 9 9 1. The device button you selected in step 2 blinks twice.
– Press the PLAY arrow button one time.
– If your device powers off then Press SELECT/OK as soon as the device powers off.
– If not, press the REWIND or FF arrow buttons to step through the available codes until it does.
– Press SELECT/OK as soon as the device powers off.
– Be sure the correct code has been selected by pressing the POWER button.
– Your device should turn back on. If it does, try changing the channel to verify programming worked.
– Press SELECT/OK to store the code.



Brahma August 23, 2016 at 9:47 pm

I have Oceanic Time Warner in Hawaii and have tried to search 3 times, to no avail. Contacted Time Warner and they couldn’t figure it out, told me to contact you…


Remote Control Codes August 23, 2016 at 10:09 pm

You are trying to program your Time Warner Remote to work with your TCL TV?
You are trying to program your TCL TV remote to work with your Time Warner Receiver Box?


Brahma August 26, 2016 at 9:55 pm

Oceanic remote to control TCL TV

Con June 16, 2016 at 10:58 am

I’m using Keyin rm133e and need codes.


Remote Control Codes June 17, 2016 at 12:01 am

Use the Keyin remote codes 013, 073.
Note these codes are a “SAFE” codes.
Do not touch other buttons if you are going to use any universal with manually set functions.
As you will get a problem….Factory on the screen, “CHILD LOCK” displays or a LOCK icon on the screen.


ross May 19, 2016 at 8:06 pm

I have a Bose universal controller and i was trying to connect it my TCL roku tv 55 in. The codes booklet for the system don’t have the brand TCL. What do i do?


Sherry May 10, 2016 at 10:09 pm

I have a TCL ROKU TV and a WOW cable provider cisco hda-ir 2.1 remote that I need the code for please.


Remote Control Codes May 11, 2016 at 6:15 pm

Try using the remote codes 11756 or 11602 with your Roku TV.


Viv May 2, 2016 at 4:26 am

Hello, I’m using a RM-2000 remote for a Roku. Do you have the code for this one?


Remote Control Codes May 4, 2016 at 10:14 pm

Try using the Remote Code 52371 to control ROKU TV.


Cherelle April 17, 2016 at 2:17 pm

TCL tv with a Brightstar remote??


Remote Control Codes April 18, 2016 at 11:07 pm

Did the codes on this page NOT work for you?? Try them all and one will work.


Edvin April 6, 2016 at 9:14 pm

My TCL TV remote broke so I bought a new universal remote, now I need a code.
Tv model is TCL l24E4243F
Remote is Robert Smart RS R-910


Remote Control Codes April 6, 2016 at 10:33 pm

Have you tried the above TCL TV remote codes? Follow the directions that came with your Robert Smart RS R-910 remote control and use a TCL remote code above to program it.


Reza Bastani April 1, 2016 at 2:55 pm

I have a motorola cable box DTA-100. I have bought a TCL tv 48 inch. I dont like the remote for tv.
I want to program the motorola remote to control TCL tv.
What code do I need to use?


Eric Schmidt January 28, 2016 at 7:49 pm

How to program TCL 55″ Roku with RCA Universal remote control #RCR003RWD?


Dustin Thompson February 20, 2016 at 6:31 pm

32S4610r tcl roku tv and a Toshiba ct-90275 remote


Aleassandra Lopez January 21, 2016 at 4:41 pm

Need TV code for a vizio TV I have a tlc remote


Remote Control Codes January 21, 2016 at 6:28 pm

Aleassandra Lopez,
Check our Vizio TV Remote Codes page.


Marlene January 19, 2016 at 1:19 pm

We have a Panasonic Blu Ray player remote we would like to program to operate our TCL Roku TV. Do you have a 4 digit code that will work? I’ve tried 11756 ( I know not 4 digits), 0091, 1566, 3851, 1346, 1756, 0366.



Remote Control Codes January 19, 2016 at 9:41 pm

Try using these 4 digit codes on your Panasonic Blu Ray remote to operate your TCL ROKU TV: 1097 or 0818 or 3201


Mo January 11, 2016 at 8:07 pm

I need access to my Roku TCL tv with a GE universal remote model 11695.


Karen January 11, 2016 at 2:37 pm

Remote code for TCL Roku television so that I can turn on off with my Sony Blu Ray player. Is this possible?


Cameron December 24, 2015 at 4:12 am

I’ve been trying to find a remote code for my TCL Roku TV 47fs3700 so that I can control it with my Xbox one. Does anyone know?


Remote Control Codes December 24, 2015 at 11:33 am

Control Xbox With TCL TV Remote Control
Remote codes:0005, 0022, 0062, 0066, 0071, 0087, 0092, 0094, 0100, 0104, 0107, 0109, 0124, 0130, 0146, 0152, 0153, 0248, 0436, 0488, 0486, 0568, 0664


Raj December 22, 2015 at 3:05 am

I need remote code for Shaw cable in Canada.


Remote Control Codes December 23, 2015 at 5:33 pm

What devices are you using? What TV brand and what box brand do you use for Shaw Cable in Canada?


Mike harvey December 19, 2015 at 5:26 am

I need access codes for a TCL Roku TV 37 inch.
I need access codes for costs Koss DVD player with a Mitsubishi universal remote.


Remote Control Codes December 20, 2015 at 11:27 pm

Mike Harvey,
If ALL of the codes above did not work, try using 11756 for your TCL ROKU TV.
Try using the remote code 0651 for your KOSS DVD Player.
Let us know if those worked.


Leave a Comment

Previous post:

Next post: