Remote Control Codes For RCA TVs







If you have recently bought a universal remote control and you need the remote codes to operate your RCA TV, we have codes below for your TV that should be working. If the first does not work keep trying the numbers down the list.

RCA TV Remote CodesRCA TV Remote Codes

RCA TV Remote codes, use the below codes to control your RCA TV with a universal remote.

The 5 digit codes for most programmable universal remote controls for RCA televisions are:
11547

11447
10047
10093
10679
11047
11147
11247
11347
11781
11948
11953
12002
12187
12247
12434

rca remote code finderREMOTE CODE FINDER FOR RCA – CLICK HERE

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your RCA TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.





Do you have any other codes to add to the list for RCA TV remote codes? Please leave a comment below.





Related Content That May Also Assist You:






{ 3 comments… read them below or add one }

Amanda December 30, 2017 at 10:47 pm

I have tried everything and googled and searched for days and cant seem to find a code to work.
I have bell tv 9400 receiver, the remote is a 5.4IR 187017.
The tv i am trying to get to work with the remote is a RCA 55 inch RTU5540-C.

Reply

Daniel Tapar December 8, 2017 at 4:46 am

I cant find the correct code for my RCA6549-B TV to match with my Universal Remote URC-2054 (for Shaw Gateway Box), I tried every codes and still no luck. Can anyone help me please!?

Reply

CAROL WELLS February 13, 2016 at 6:10 am

I HAVE A A PHILLIPS UNIVERSAL REMOTE CONTROL FOR MY RCA TV. I ALWAYS USE THE RCA CODE 00002. BUT NOW MY TV IS GONE ON A BLINK AND I AM HAVING A HARD TIME GETTING MY TV TO WORK, ONLY THING IT IS SHOWING IS IVORY SNOW, IT’S BLANK! I HAVE DONE MY BEST TRYING TO RE- ENTER THAT CODE (00002) BUT NOTHING HAPPENS. I HAVE USED OTHERS CODES. I PUSHES THE RIGHT BUTTONS. THANK YOU——-CAROL WELLS

Reply

Leave a Comment

Previous post:

Next post: