Yamaha Soundbar Remote Control Codes









If you have a Yamaha Soundbar and want to control it with a CAB SAT remote or a universal remote control, we have the codes needed. A Yamaha soundbar can be controlled with any universal remote if you have the correct programming guide and the correct remote codes for the sound bar. If the codes below do not work with your Yamaha sound bar, please leave a comment below with the model number of your remote control and the sound bar and we will find you the correct remote code.

Remote Control Codes For Yamaha Sound BarsYamaha Sound Bar Remote Control Codes







Program your universal remote control to a Yamaha Sound Bar. Use the following 5 digit remote codes.

Yamaha Sound Bar 5 Digit Remote Control Codes:
31947
31331
30176
31176
30354
10030
10797
10017
10019

All codes reported working with these Yamaha Sound Bar Models: ATS-1030, YSP-1000, YSP-5100, YSP-4100, YSP-1400, YAS-101, YAS-103, YHT-S400, and YSP-4000BL.

These codes have been tested with the…. Comcast remote controls, Xfinity XR5, DVR 3 device remote, XR2 Remote, Xfinity XR2 U2, XR2 R2, DirecTV, Directv HR24 STB, S10-S4, U-verse remote control, RC65, Satellite H20 Receiver, DirecTV Plus HD DVR, Comcast 3-in-1 remote, and 1067BG3.

If using Xfinity try these programming methods:
-Hold Setup (2 button flashes)
-994
-Setup
-00169
-Vol Up (2 button flashes)
(Programs the volume down button to toggle TVOL on the Yamaha sound bar)

OR

-Hold Setup (2 button flashes)
-11144 (2 button flashes)
(Accepted by the Xfinity remote and programs the volume down button to toggle TVOL on the Yamaha sound bar, Should let you turn TVOL ON and OFF)

Help with Xfinity XR2 Remote here.

If using U-verse or DirecTV (ATT) try these programming methods:
-ATT/OK-955-AUX-ENTER
-ATT/OK-977-AUX-TV-ATT-ENTER

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
Then try this:
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 30176
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 993
-Press SELECT
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 963
-Press Ch Down
Then teach the Yamaha Sound bar the commands from the DirecTV ATT remote control.

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
-AV1 or AV2
-Press and hold MUTE & SELECT for 2 blinks
-Enter 993
-Press SELECT

Need more help programming your Universal or CAB/SAT remote to your Yamaha soundbar? Please leave your questions below and we will be happy to assist.











Universal Remote Controls and Replacement Remotes
Universal Remote Controls - Replacement Remote Controls



Related Content That May Also Assist You:

















{ 7 comments… read them below or add one }

Terry March 29, 2017 at 1:27 pm

I just bought a YAS 106 BL. My cable service is Wideopenwest My remote does not have a model number on it. The book says its a Universal remote, but I cannot get it to work the sound bar. Can you help. Thanks

Reply

Rodney March 28, 2017 at 11:28 pm

Yamaha frs60 wy57800 can not find code for

Reply

L.J. February 27, 2017 at 5:59 pm

I am trying to control my Yamaha ATS – 1060 soundbar with a Cablevision UR2-CBL-cv04 remote. The remote requires a 3 digit code but all of the above codes are five digits.
I did try to program the 5 digit code into the remote, but it doesn’t take control of the Yamaha soundbar and it no longer controls my Samsung TV.
Are there 3 digit codes for the Yamaha ATS-1060 soundbar?
If so, is this remote capable of controlling the Samsung TV and the Yamaha sound bar at the same time?

Reply

bob February 8, 2017 at 12:04 am

I can’t get my GE universal to connect to my Yamaha 1400 soundbar.
It uses a 4 digit code not 5 digit.

Reply

Richard January 22, 2017 at 3:39 pm

I have a Yamaha sound bar YAS-101 and a ONN universal remote model No. ONB13AV004. This remote takes 4 digit codes and all your codes for Yamaha are 5 digits. Is there a 4 digit code for this sound bar?

Reply

Gary Figueira November 15, 2016 at 2:58 pm

I have a Yamaha YSP-600 sound bar and a Atlas Rogers 5 device remote which requires a 4 digit remote code I can’t seem to find.

Reply

Holli Carpenter September 12, 2016 at 12:04 am

I can’t find the code for my Xfinity Comcast remote (I don’t have the X1 platform) that works with my Yamaha ATS-1060 soundbar that I bought from Costco today. None of the codes Comcast provides is working.

Reply

Leave a Comment

Previous post:

Next post: