JBL Soundbar Remote Control Codes

Remote codes for JBL soundbars. If you have a JBL Soundbar and want to control it with a Universal remote control, Cable remote, or SAT remote, we have the remote codes that will make it work. A JBL soundbar can be controlled with any universal remote control if you have the correct programming guide and the specific remote codes for the soundbar. If the codes below do not work with your JBL soundbar, please leave a comment below with the complete model number of your remote control and model number of your JBL soundbar and we will find you the correct remote code.

JBL Soundbar Remote CodesJBL Soundbar Remote Codes

Program your universal remote control to a JBL Soundbar. Use the following 4 and 5 digit remote codes.

JBL Soundbar 4 Digit Remote Control Codes:

JBL Soundbar 5 Digit Remote Control Codes:

If these remote codes do not work, try the code search on your CAB or SAT remote…

Code Search using Comcast Remote Control:
– Turn on your Soundbar
– Press Aux once
– Press and hold Setup until the key blinks twice
– Release Setup
– Enter 9 9 1 3 or 9 9 3
– The Aux key will blink twice
– Press Power and aim the remote control at the soundbar
– Press CH+ until the soundbar turns off
– In the code search mode, the remote control will send IR codes from its library to the selected device.
– Press Setup once to lock in the code
– The Aux key will blink twice

Code Search using DIRECTV Remote Control:
– Turn Soundbar ON
– Volume up but MUTED
– Press AV1 or AV2
– Press and hold MUTE and SELECT for 2 blinks
– Enter 9 9 1 and wait 2 blinks
– Enter 3
– Press and release VOL UP
– Point the remote at the soundbar and keep pressing and releasing the CH UP key
– When the volume changes, press SELECT to lock in code

The above CODE SEARCH (Remote Control Programming) methods are written for Comcast and DIRECTV remotes but can be used and tried with ANY universal remote. The code search methods above are examples of how to get your current remote to control your JBL soundbar.

Need more help programming your Universal or CAB SAT remote to your JBL soundbar? Please leave your questions below and we will be happy to assist.

{ 9 comments… read them below or add one }

Jeff Sieveking April 20, 2018 at 2:54 pm

Need the code for JBL SOUNDBAR for a charter tv remote # 1060BC3-0780-001-R. C141907. The codes I’ve tried work the volume control but so does every other button on remote


Derek December 27, 2017 at 4:21 pm

Need 3 digit code for spectrum remote: UR5U-8780L-TWC. JBL SB 350


June November 20, 2017 at 3:03 pm

Hello. We have cox cable, remote UBC-8820-MOTO. We have the JBL BOOST TV remote. Speaker model ND0053-IG0014211. Plz provide codes & detailed instructions as the skin our original remote is ripping away from the remote. Thx


Gary November 12, 2017 at 2:31 am

programming my direct tv remote to jbl cinema 400 pressing up or down or mute on remote, only causes volume to increase. no down or mute.


Jessica Slovensky October 17, 2017 at 10:20 pm

how do i use my lg tv remote or att uverse cable remote to control the jbl sounbar volume?


Mike September 25, 2017 at 9:31 pm

Need 3 Digit Code for Spectrum Remote, Model # URSU-8780L-TWM For JBL Model # SB 300.


Don August 20, 2017 at 5:00 pm

Codes work to control the volume on my JBL SB400 with xfinity remote but not the on /off with the xfinity remote?
I have tried all the codes.
I have a Samsung TV.


Cheryl August 4, 2017 at 9:16 pm

I am also trying to pair my JBL SB400 to a Spectrum tv remote model UR5U-8780L. Instructions for the remote call for a 3 digit code for all other devices. JBL is not listed.


Mark June 17, 2017 at 11:17 pm

Hi Im trying to get my JBL SoundBar to work with my Spectrum remote model#ur5u-8780l
Non of the codes work PLEASE HELP!
Thanks in advance


Leave a Comment

Previous post:

Next post: