Remote Control Codes For Sanyo TVs

3 Digit Universal Remote
Control Codes For Sanyo TVs

Sanyo TVs - Remote Control Codes

The universal code for most is 049 for a Sanyo TV. With your universal remote you press the code search key until it illuminates and then you press and release the TV key. Next enter the three digit code (3 digit remote code page) and the indicator light turns off.

If you enter in the wrong code the light will flash rapidly. Aim the remote at your tv and press the on/off key. If your tv turns off then you have found the right code!

Try these codes for your Sanyo TV also: 054, 069, 023, 025. If those do not work then also try: 004, 013, 049, 108, 110, 180, 209

How TO Program Your Sanyo TV with a Universal Remote

{ 13 comments… read them below or add one }

nane g. malugao October 21, 2017 at 8:56 am

my tv is sanyo lcd 24k40 was accidentaly locked. i bought universal remote control ( kevin rm-88e) to the hope i can rid the locked came out on my tv screen. but the problem i dont know how to operate the universal remote control using a pin code. can you help me about this problem


cris June 12, 2017 at 11:49 pm

I bought E-S920 for Sanyo TV LCD LED and HDTV remote.
Please help how to program which is not directly functioning to my tv.


Lorely Leslie October 6, 2016 at 12:31 am

Thank you for your help, I got it .😄


steve October 4, 2016 at 5:48 am

When I’m following the directions and I press the tv button it lights up but it doesn’t flash.
If I push a number them it flashes.
I can’t get this thing to work.
It’s a Sanyo tv and a RCA remote.


Jay June 1, 2016 at 2:53 am

Thanks a lot you got my TV working and it was very simple to follow.


SHERRI LAITINEN May 28, 2016 at 12:18 am

I have a Sanyo TV/DVD player model # DP32670 and I cannot find the universal remote code for it.


Vincent Tizio March 14, 2016 at 9:29 pm

I have a 4 item remote that I have had for several years[and it has worked fine] It stopped working yesterday we put new batteries in it and it lost it’s memory. I looked up the code and tried them all but none of them work. The remote is a onn model ona13av269. I have a SANYO tv & a MAGNAVOX combo dvd-vhs. Can you help me to set up the correct codes
thank you very much


Mrs.Brooks February 17, 2016 at 9:14 pm

I have a Magnavox TV and I want to program it to a Sanyo DVD player, how would I do that?


Remote Control Codes February 17, 2016 at 11:38 pm

Mrs. Brooks,
If you are trying to use your Magnavox TV remote to control your Sanyo DVD player… You will first need the codes for your Sanyo DVD player. Codes for Sanyo DVD player are: 0670, 0695, 0790, 0873, 0896.

To program your Magnavox TV remote to your Sanyo DVD…
Press and hold the Code Search button until the red indicator stays on.
Release the Code Search button.
Press and release the desired mode button (DVD).
The red indicator blinks, then stays lit.
Enter the 3 or 4 digit code.
Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
With your device on, press CHANNEL Up.
If the device responds, no further programming is required.
Note: If some buttons do not operate your equipment, try one of the other codes for your brand.


maria September 11, 2015 at 9:11 am

A codes for the phone so I can have it on the phone for a DVD codes free


Mary Sailman October 25, 2015 at 4:25 pm

My TV is a very old, but stilling good work. I need a new Sanyo remote, but I dont know what code. How much?


Remote Control Codes October 25, 2015 at 7:35 pm

Mary Sailman,
You can get a Sanyo TV remote control here. Codes for Sanyo TV remote controls are 054, 069, 023, 025. If those do not work then also try: 004, 013, 049, 108, 110, 180, 209.


Josh March 28, 2016 at 8:58 am

How to program Sanyo remote RMT-U220 TO MY INSIGNIA TV?


Leave a Comment

Previous post:

Next post: