Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Remote Control Codes

    Jennifer,
    PANASONIC Projector Codes:
    1114
    1243
    1321
    1331
    2113
    2114
    2121
    2222
    2223
    2224
    2321

    -CUR

  5. Remote Control Codes

    John,
    EXCELVAN Video Projector Remote Codes
    1211
    1224
    1333
    1411
    2123
    2124

    -CUR

  9. Eber

    How do I program zenith universal remote to my Sony Blue Ray player I have tried all the codes or I might be doing it wrong

  11. Judtin

    I have a Crest universal 8-in-1 remote and I want to program to control LG blue ray Hd (dmrbwt750)

  12. HarryIII

    Have an old Hitachi VCR (DA4) and a Radio Shack 3 in 1 Pocket Remote (15-1990). Need the 4 digit code … the ones in the remote manual don’t seem to work.

  13. jackie

    My universal remote for my Skyworth television is not working. When I press anything only the set menu blinks a red light.

  14. csp

    turn on DVD manually. press DVD button, info lites up; press power while holding DVD key, led goes off, continue to hold 3 seconds, lite goes back on. Release both keys. Press ‘3’, then power key. If it goes off, store using STOP key next to Rec. If not, press power key til it does go off, then press ‘stop’ to store code. Good luck, I’m not pleased with mine and will probably take it back.

  15. CSP

    Just bought same item. Instructions inside [for SAKAR, not Vivitar] refer to the use of a “Stop” button to hold codes — but there IS no Stop button on this model! In addition, most codes provided do not work. I’m going to take mine back.

  16. Amit

    I have Ipmacro HD-5301b based IPTV player, (S/N AK1077535296).. I have Bose universal remote, could you help me identify universal remote code for ipmacro’s HD 5301b?

  20. Ben

    Just purchased a GE remote that says it will control the Amazon Fire Stick, but doesnt have a code for it in the book.

Comments are closed.