Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Remote Control Codes

    Tonya,
    What is the model number of the remote control you are using?
    Let us know and we can supply a remote code.
    -CUR

  3. Remote Control Codes

    Snow Darling,
    Try the Emerson TV codes from top to bottom.
    The remote codes at the top of the list are the ones most likely to work.
    -CUR

  4. Snow Darling

    Emerson has like 15-20 codes listed how do I know which one to use?
    Every time I use the volume button it switches the input source on the tv.

  6. Leta BRAY

    I need the universal remote codes to the Insignia TV brand N-401240A13.
    I have been able to get some of the codes to work on my GE universal but none will operate my menu channel scan so my antenna can not do a channel scan to get any channels.

  8. Brett Little

    I recently took over ownership of a pioneer tv and set top boxes from a family member who has recently passed away. He was using one of your universal remotes and I literally have no idea how to get it to change from mono to digital or even to hdmi.

  10. Darpan

    I have Philips home theater HTS 32518/F7.
    I am trying to connect it with SRU2103/27 Philips universal remote.
    With code 1514 everything is working except volume.
    How to set it to control home theater speakers?

  18. Remote Control Codes

    Dale Adams,
    The only remote code listed in the database for a Toshiba vhs and dvd combo player is 902.
    -CUR

  23. Remote Control Codes

    lance justin,
    We currently do not have any remote codes for the AAXA M1 Limited micro projector.
    If anyone can assist, please let us know if you have any remote codes for the projector.
    -CUR

Comments are closed.