Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  1. Jen

    I have the Samsung universal remote BN59-00599A and need the 3 digit code for my sony blu-ray/dvd home theatre system?

  2. Thierry

    I have the Sansai urc L969 and I want to control the sound bar from Philips HTL 2150. Do you know the codes? Thank you.

  5. Victor Paul

    I appreciate the reply. I will read this. The book I have only shows how to get the remote to work with the TV brands. I did find a way to get my cell phone. Android to work with the dms2004 using AnyMote app. But they don’t use a universal remote code.

  8. Remote Control Codes

    Tavita James,
    Try using the remote codes 01414, 00053, 00181 and 00185 to control your Zenith DTT901 Digital TV Tuner Converter Box.
    -CUR

  15. Kelly Donaldson

    I have a digital stream converter box and my remote is jumbo universal remote. Do they have a code for that

  16. Sengupta

    I am using the sat receiver AB Cryptobox CR 600HD. Looking for the remote code in order to use an universal remote controller. Can you please help me to find it?

  17. Eric phillips

    I have a GE universal remote 27985 and I have a Magnavox TV I need the codes for it please.

  19. Ilan Bauminger

    Can you help me get, or buy, the set of IR signals used by a LG TV?
    Once needed, I will be able to provide the LG TV model number.

  20. Tim neal

    I have a g.e. converter box but no remote to operate it. I have a universal remote which requires a three digit #. But it is not in my universal remotes listing of codes.

  25. Luke

    I have a Hi-sense EN22653A remote. None of the buttons illuminate and it doesn’t have a button labeled “setup” or anything of the like. It has a power button, input button, tv/av rocker button, vga/usb rocker button, menu, home and others. I’ve been trying to program it to a Toshiba TV for over two weeks now with no luck; Hi-sense customer support has been completely unable to help with any remote control programming. I would greatly appreciate any insight you can offer. Thank you kindly!

Comments are closed.