Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  3. Kevin Miller

    I have a xfinity universal remote. Model number FCC ID:MG3-4300. I need a code to program it to my Magnavox DVD player. Thanks for any help you can provide

  6. Erica Young

    I have a GE universal remote control #RC24911-A. I’m trying to program it to work my Phillips Blu-Ray player #HTS3051BV/F7C

  10. Michael wright

    I have a Phillips unviersal remont I need the codes for a Panasonic flat screen tv

  12. Mary

    I bought an used DVD/ RECORDER for the dvd player manly but it had no remote. I have searched for codes and remotes, but haven’t had any success. If you could help, stir me in the right direction, or simply tell me there is no hope, I will be forever grateful
    My DVD/RECORDER IS A TOSHIBA :
    Toshiba DVD-RWR+RW/R recording
    Serial number pc114038252
    Model number D-K10
    Thanking you in advance for you consideration.

  13. Lyndsey

    Hi my grandpas DVDs player doesn’t have a name, it just says Dolby digital. Is there is a code for this? Thanks

  14. Carter

    Hello I have a lg TV and a Samsung HT d550 home theatre system with no remote I’ve tried all the codes to program my lg remote model # mkj40653801 and nothing I’ve found Manuels for the tv remote and the theatre system but nothing helped , help would be Mutch apreciated

  15. Daniel

    I tried to reply to the comment but it would not let me. My question was Looking for 3 digit code for sharp blu Ray BD-HP24 The original remote is a SHARP GA768WJPA but I am trying to use my Dish Network remote that only accepts 3 digit codes

  17. Cassandra

    I am also wondering what i need to push for the device i am programming it to. Do i push dvd or aux for this device?

  18. Cassandra

    I have a polaroid universal remote that i am trying to program to a panasonic dvd home theater surround system. How do i do this?

  19. Daniel

    The remote that came with the Blu-Ray player is a SHARP GA768WJPA
    But I want to program my Dish Network remote to it which is what I am having problems with. Any help would be appreciated.

  20. thierry giblot ducray

    Thank you for the answer but the sansai l969 accept only 4 number code. Hence it does not solve the problem. Thank you again for the help.

  22. Daniel

    the remote that came with the Blu-Ray player is a SHARP GA768WJPA
    I am trying to program a Dish remote to operate it with no luck

  23. Charmaine Crabbe

    Aloha,
    I’m trying to program a Aquos t.v/dvd combo using a Rca universal remote but have no codes for this brand. Its a five digit code that I’m looking for.
    Mahalo,
    Charmaine

  24. Linda

    I need a 5 digit code for a rca rcr003rwd universal remote to control an insignia dtv converter box ms-dxa1

    I think I’ve tried every one on the web.

    Thx!

  25. Lisa

    My Element tv remote app wants a 6 digit code. Supposedly I can get the code from in my tv menu under settings but there is no settings.

Comments are closed.