Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Randy Strine

    I have a Vivitar universal remote. I have no instructions. On the battery cover is MID#3290715. I would like to control a Phillips DVD player with it please.

  5. Amy Lansdale

    Inside remote LC7 LCD-TV
    BNH000F01011
    RENESAS. IC
    C7A3/A3
    11HB
    933 and TV brand westinghouse model#SK-19H210S

  7. Remote Control Codes

    Shelly Karys,
    Soniq TV remote codes are: 0178, 0180, 0003, 0092, 0045, 0019, 0030, 0056, 0032, 0047, 0054, 0060, 0039
    -CUR

  11. Remote Control Codes

    Ron,
    For VisionQuest… try the remote codes 0032 or 0054.
    If those codes do not work, do a code search on the remote.
    -CUR

  13. Remote Control Codes

    David Cadena,
    Yes you can use the RCA remote with your SV2000 DVD player…
    Here are the remote codes for an SV DVD Player: 0504, 1608, 0192, 0247, 0447, 0591
    Please let us know if they worked for you.
    -CUR

  14. Remote Control Codes

    Rory Martin,
    5 Digit Remote Codes for Samsung Blu-Ray player are: 32905, 30573, 31075, 32905, 30490, 30744, 30820, 30899, 31044
    Give those a try and let us know if it worked using your RCA remote.
    -CUR

  15. Remote Control Codes

    Lara,
    The Telefunken TV remote codes are 1069, 1101, 1102, 1104, 1105, 1107, 1201. Please let us know if that worked for you.
    -CUR

  16. Lara

    I have a Telefunken TLEDD 39fhd, and a Ellies BPUNIR4W remote. Can you please give me the code to made the remote work with the tv? Thanks.

  17. Rory Martin

    Looking for 5 digit remote code for samsung bluray player…i have an rca universal remote.

  19. Felicia Eckiss

    I have an Apex digital converter box and I need the code to program a one for all universal remote.

  24. Shelly Karys

    I’ve used 10 codes given by your site and none works for my TV. It is a Soniq TV L32V12A-AU.

Comments are closed.