Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
Panasonic hdd recorder DMR-HW220
Daniel,
Try these Sanyo Sound Bar Remote Codes: 20047, 10154, 10159, 10051, 10250, 20035, 30189
Others to try…
30531, 20081, 21593, 20593, 20000, 20039, 20149, 21781
-CUR
I was looking for a code for a Sanyo sound bar with a wired sub. Thanks in advance!
Neil,
Try using our XENON TV REMOTE CODES page.
-CUR
Edgardo,
Try these JVC DVD REMOTE CODES:
0623
0558
1901
1940
0539
0503
0638
0867
-CUR
Mike,
To program your RCA sound bar, try using the remote code = 31254
-CUR
I need a code to program my RCA sound bar RTS735E into my GE universal remote model #12404. Thank you.
I want to know the universal remote code for my JVC DVD audio video model no. CA-DXT77
I need a 3-digit remote code for Xenon. I’ve tried the numbers here but it not working.
Tracey,
Try the 5 digit remote code 11758 for your Acer TV.
-CUR
Abram Peters,
We only have 4 digit codes in the database for Fluid DVD…
Fluid DVD Player 4 digit remote codes: 2964 and 1423.
Remove the first digit off of the 4 digit codes and you may have a working 3 digit code.
-CUR
Chris,
Toshiba Sound Bar Remote Codes: 1788, 608
-CUR
Samson,
Supermax Receiver Remote Codes = 9876, 8888, 3606, 2046, 3327, 3328, 3329, 6000, 1407.
Hope these help.
-CUR
Tess,
Yes that remote will work on Emerson TVs.
Try checking our Emerson TV Remote Codes page.
-CUR
Ah,
The Amazon Fire Stick uses bluetooth, so there are no remote codes.
The only options are using an app on your phone to control the Fire Stick from Google or Apple or get a new remote from Amazon if you lost the FSTV remote.
Here is a video that may assist you to use a normal remote to control your Fire TV.
-CUR
Amazon Fire stick?
Would like to know if this universal remote model #ONB13AV004 can work an Emerson EWC1902? What would the code be?
I need code for universal remote for supermax 2425 receiver.
Need codes for a Toshiba SBX1250 sound bar.
I need a 3 digit code for my universal remote for a Fluid DVD player, model number is 1607000 (DVDHDMI01).
Hi there I need a 5 digit code for ACER TV.
Eugene Carte,
0759 MAY work…. But…
The Craig Digital Converter box is reported to not be able to be programed and used by a normal Universal Remote. If you try, during the process of searching for a code the Craig Digital Converter box will respond but when the code is locked in, the buttons on the remote do no correspond with the converter and it does not work properly.
Some people have told us they have simply just bought a complete new CRAIG DTV converter box WITH the remote. You may be able to find a remote for your Crain DTV here
1: Get the universal remote that supports the Craig Brand of digital converter box.
Forget this step if you already own one.
2: Next, find the manual that came with it. Inside will be the Craig codes for the device. Find the Craig brand and use the listed remote code to program the remote according to the instructions and it may work.
-CUR
I need a code for my Universal remote for Craig DTV converter box can any one help me?
Christine,
Do you mean KTV? Or KTC TV?
KTV TV Remote Codes are: 0280, 0217, 0180, 0185, or 0030.
-CUR
Victor,
Try these common SAT RECEIVER Remote Codes: 1377, 0392, 0566, 0639, 1639, 1142, 0247, 0749, 1749, 0724, 1856, 1076, 1108, 1109, or 1414
-CUR