Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
How can I program my cox URC7820 universal remote to control my apex dt502 digital converter box? Any help would be appreciated. Thanks.
Ryna giboney,
Sanyo Blu Ray Player Remote Codes = 0742, 0667, 0705, 0718 0735
-CUR
Mike Skovron,
Try these remote codes for your Phoenix TV = 0072, 0216, 0320, 0385, 0037, 0556, 0370, 0486, 0163, 0087
-CUR
Moses,
The only code we have in our database is for HARMAN KARDON DVD is : 2125
Give it a try and if the code does not work please let us know the model number on your HK DVD player.
-CUR
James Francis,
Check our LG DVD codes page.
-CUR
Adam Culler,
Check our Element TV remote codes page.
-CUR
Remote Code for Element TV?
Need a code for an LG DVD PLAYER.
I need the DVD remote code for Harman Kardon DVD player my I am using chunghop RM-230E universal DVD remote.
Require specific code for 2013 Phoenix 22″ LED TV
2208, 0051, 0169, 0000 do not work
I have a Sanyo Blu Ray DVD player. What is the code for it on a RCA universal remote rcr314wr?
Adam,
Your Sony DVD Home Theater System MAY be able to be controlled by a universal remote. We need to know the model number of your GE universal to give you the correct remote codes. Please let us know the exact model number of your GE remote and we can provide reliable remote codes along with instructions on how to program. NOTE: You may need a special remote to truly program every single function for your Sony DAV-TZ140, therefore you may be better off buying a SONY replacement remote.
Here is the replacement remote for a Sony DAV-TZ140 from eBay.
If you choose to use another universal remote, you will need to program it to make ALL functions work…
Sony HTIB systems use the Sony protocol (both 15 and 20 bits). The 15 bit commands including volume and power use device number 80 or 208 and can be sent by many different setup codes.
Most of the functions that control DVD menus such as the arrow keys are 20 bit using device 16, sub device 16.
Many of the other buttons will need to have EFCs assigned to them.
The EFCs need to be programmed.
Here is the SONY EFC command code list for each function if you find a way to use them properly with a high quality programmable remote control:
TV Power 34629
Theater Sync 43333
Display 53199
Function 44750
0 50894
1 19150
2 18126
3 18638
4 17614
5 19406
6 18382
7 18894
8 17870
9 51918
TV Input 10053
Angle 33998
Audio 35022
Clear 50638
Disc Skip 59854
Down 63182
Fast Fwd/Tuning Up 27598
Left 63694
Preset + 26318
Open/Close 60366
Pause 16078
Play 16590
Preset – 27342
Return 63438
Rewind/Tune Down 25806
DVD Display 02766
DVD Menu/Album + 02254
DVD Top Menu 01742
Enter 52174
Right 62670
Search Forward 09422
Search Reverse 10446
Select, Enter 64462
Shuffle 43214
Stop 17102
Subtitle Tuning 34510
Up 64206
DVD Angle 14236
DVD Audio 15260
DVD Clear 50588
DVD Disc Skip 58780
DVD Display 39836
DVD Menu 02204
DVD Open/Close 35228
DVD Pause 59036
DVD Play 16590
DVD Play Mode 42140
DVD Repeat 43932
DVD Return 51612
DVD Setup 38044
DVD Stop 60060
DVD Subtitle 13468
DVD Time 43676
DVD Title 02204
DVD 61391
Mute 33743
Power 32719
Power Off(discrete) 40399
Power On (discrete) 41423
Sleep 13007
Tuner 07887
Volume Down 31951
Volume Up 32975
Function 44750
Dynamic bass 53198
Movie/Music 52430
Video Format 16846
Picture Navi 03022
Tools 28110
Advance 10958
Replay 09934
Sound Field+ 45518
Sound Field+ 44494
Pause 16078
Play 24782
Sound Field – 44494
Stop 17102
Tune – 41934
Tune + 40142
Tuner Men 41422
Tuner 48591
Satellite Video2 00463
Video 1 08399
-CUR
Christopher,
UM4 LRO3 is a battery type. Same as a AAA or an MN2400 battery. Those numbers just tell us the battery type.
Can you look on the back of the remote or possibly the front top portion for the model number? Look under and in the battery section of the remote and the model # of the remote should be visible.
Let us know what the model number is and we can give you the instructions and the codes to program the remote.
-CUR
I need instructions and codes for a universal remote, looks like 6 in 1, all I can get is UM4 LRO3 off the battery compartment. Please help!!!
I am trying to program a “GE universal remote” to control a “Sony DAV-TZ140”.
Do you know the correct code? I have tried all listed on several guides.
Mb93,
EMERSON DVD VCR COMBO Remote Codes Are = 230, 456, 458, 227
-CUR
Zach Himes,
Please let us know the model number of the GE remote you are using.
-CUR
Laurie Duncan,
Try the Symphonic TV Remote Codes = 198, 003, 053, 155, 189
-CUR
Eugene,
Try checking the INSIGNIA converter box manual which can be found here. Insignia Converter Box Manual.
-CUR
Latishia hudson,
What type of remote control are you using to try and control your ETC TV?
Do you have a model number of the TV so we can find the exact code?
-CUR
Paulus Mpengo Munango,
The remote codes for the JVC Home Theater TH-PHN200 are = 4002, 4013, 4014, 4028
-CUR
Where can i get a Remote code for home theater JVC TH-PHN200?
I have what is called a ETC flatscreen tv. Its a small tv and i cant seem to find the universal remote code for it. CAN YOU HELP ME?? ???
Can you program a charter remote to a insignia converter box if so do you have the 5 digit code?
Remote code for Symphonic 19 television B-19WM?