Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
Do you guys have a code for a Kirsch k10 5.2CH surround receiver amplifier for a RCA universal remote?
Susan,
ESA TV Remote Codes = 903, 901, 201, 601
-CUR
Robert Simon,
Simply press the CAB (cable) button to control the Comcast cable box, and press TV button to control TV.
If this does not work, the Genesis remote control needs to be reprogrammed.
-CUR
Jarrod,
RCA HDTV/DVD COMBO remote codes…
RCA TV = Controlled by TV:
1948, 1958, 2002, 2187
RCA DVD = Controlled by DVD:
1022, 1193
-CUR
Ruth Tinka,
Check this page for remote codes for Finlux TVs.
Make sure you choose the correct remote you are using or try the different remote codes on the page.
The programming instructions should be on the page if needed.
-CUR
I am trying to set up my TV by entering the channel using a universal remote control. The model is Finlux 32FLD882H. Please assist if possible. How do i go about it?
Need a code for RCA 32″ LED LCD HDTV DVD COMBO MODEL NO. LED32B30RQD.
Genesis remote used on Comcast cable box…. Genesis remote will work TV volume but not cable box.
I was given a TV with the name ESA on the front. No clue where to look for a remote code.
Ciera,
For your Symphonic TV, use the remote codes = 198, 003, 053, 155, 189.
For your “black skinny DVD player” we need the make and model of it so we can provide you with the proper remote codes.
-CUR
Paulus Mpengo Munango,
Try the remote codes 0026, 0197, 0069, 0242, 0923, 0012, 0065, 0067, 0141, 0060 for your JVC TH-PHN200.
-CUR
I need universal remote code for JVC TH-PHN200.
I need the code to a universal remote that operates a Symphonic television and a black skinny DVD player.
Toni,
Try these remote codes for your Technika TV with DVD Combo: 0207, 0065, 0335, 1177, 1065, 2011, 1130.
-CUR
Michael,
Find our TCL TV Remote Codes here.
-CUR
48″ TCL TV and Antsig universal remote, need code please.
I have a Technika 19 inch TV with the DVD player built in to the side, I really need the 4 digit code to set the remote control up.
In need of a code for a Genesis Technologies GT 3.0 DVD/Multimedia System installed in select RVS.
Race Everett,
What model number remote control are you using to program your VIP222 DISH BOX?
How to program remote to DISH receiver:
– Go to System Info screen.
– Hold down the “SAT” button until all lights light up.
– Enter a number between 1 and 15 using the numeric keypad on the remote.
– Press the pound (#) button.
– Once the SAT button blinks three times, press record.
-CUR
Robert Emmons,
Is your Xfinity box made by Motorola?
If so, try Motorola cable box codes = 01376, 00476, 00810, 00276, 01187, 01254
If no let us know that manufacturer of your Xfinity box and we can further assist.
-CUR
Jean,
For Mecer TVs, try remote codes: 00320, 00349, 00350, 00337, 00343.
If these do not work, let us know your Mecer TV model number.
-CUR
I am looking for the codes for a vip222 dish network box.
Please need 5 digit it code for Mecer 47 inch TV. Thank you.
I need a code for my ge universal remote to control my xfinity cable box.
RYAN JONES,
Apex dt502 digital converter box codes that are confirmed to work are: 749 or 0749 or 00749 depending on if your remote uses a 3,4, or 5 digit code.
-CUR