Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
Rodney Clatterbuck,
Try checking our Home Theater System Remote Codes page.
-CUR
Trying to find 4 digit remote code for Sony BDV-N5200W Home Theater.
Cheri Jones,
You may need to use the TV button on the RCA remote to program the TV with the codes 1095, 1380, 1045 and 1062.
THEN…
Use the DVD button on the RCA remote and program it with the codes 2050 or 2393 for your Sanyo DVD.
-CUR
Iain Ward,
The IR remote code for the Bush Freesat for your model sat box should be 3439.
If this does not work, you may want to get a Harmony Remote as this type of remote has much greater functionality than the basic universal remotes that you program based on a book of outdated manufacturer codes.
-CUR
I need codes for my Bush Freesat 500+ box. I have tried dozens of codes and none of them work.
I just bought a Bush 4 in 1 remote control.
I have a Sanyo TV with DVD built inside TV. I have a RCA remote uses only 3 codes it will program TV but not DVD.
Tracey Aldrich,
There’s no onboard IR receiver on the Amazon Fire Stick. You can use a USB dongle.
-CUR
Jill,
Check our 4 digit DVD player remote codes page.
-CUR
Hello, i have a hold Digitron dvd player and the remote is broken so i bought a universal remote only it requires an 5 digits code and the one I found on internet are either 3 or 4 digits.
Can you help??
I need codes for an LG dvd player. The universal remote being programmed to run it is a dish remote.
Need 4 digit code for a GE 6 device Universal Remote for the Amazon fire stick.
Michael dela cruz,
For Medion Sound Bar, try the remote codes = 0660, 0883, 1517, and 31517.
-CUR
Need code for soundbar Medion please.
Donald,
Durabrand box tv remote codes – 0178, 0180, 0003, 0171, 0463, and 1034.
Sanyo DVD player remote codes = 0790, 1919, 0873, 0670, and 0695.
-CUR
Adeshina,
Skyworth TV codes = 0696, 0698, 0727, 0748, 0753, 0817, 0037, 0556, 0009, and 0264.
-CUR
I have a Durabrand box tv, and a Sanyo DVD player with a GE UNIVERSAL. Please help me with these codes.
Need Remote Code for Skyworth LCD TV.
Aregbesola Joseph,
Use these codes with the ONE FOR ALL remote for your Philips DVD/CD Player = 1914, 1911, 0675, 0539, 0646, 0885, and 0503.
-CUR
I need a code on a One for All UEI designed remote control to power my Philips DFR 1600 DVD/CD player Digital AV Surround Receiver or other codes for same system with different remotes I may come across.
jayson encinares,
Try the codes on our SONY DVD Remote Codes page.
-CUR
Ashley,
Try Samsung Sony Panasonic Philips & Toshiba codes for Dick Smith TVs.
-CUR
I need a code for a Dick Smith TV.
Does anyone have a code for the Pixel TVs?
Currently, i have a Cybertec RM-79LE Genius universal remote control. I’m trying to get a code here. I tried the codes provided here but its not working with the remote. I’m using the remote with my sony HDMI CD/DVD Player DVP-SR700H. Can you guys help me?
Sergio,
Kirsch k10 5.2CH surround receiver remote codes are 4435 and 4450.
-CUR