Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  1. Nash

    I purchased an RCA TV model RCR314WR and I am looking for the code for the new Roku Stick streaming player. There are a few codes listed for Roku, however none of them work and I wonder if it’s because the Roku Stick is too new?

  3. Remote Control Codes

    Detra Phillips,
    Sansui TV Remote Codes are 0463, 215, or 115.
    If your universal remote only accepts three digit codes then simply drop the 0 on any 4 digit code.
    Also, try the Sansui TV Remote Codes page for ALL remote codes to try.
    -CUR

  7. Remote Control Codes

    Rebecca Bateman,
    Haier TV remote control codes = 0217, 0157, 0081, and 0216.
    Magnavox DVD remote control codes = 162, 0915, 0914, 0969, 0408, 0979, 0981, 0980, and 0456.
    -CUR

  8. Remote Control Codes

    Carolkikz de veraa,
    Try these 3 digit Union TV remote codes = 055, 060, 065, 067, 013, 054, and 089.
    -CUR

  15. luis enrique

    Quien me puede ayudar con el codigo de una televion UpStar, por favor se lo voy agradecer.

  16. carolkikz de veraa

    I need 4 digit code for my UNION LCD TV UG LCD 3204 is the model of my TV. I have CYBERTEC RM 312x and HUAYU HR-159F (3 digit codes) universal remotes. Hope you can help me program my TV.

  18. Julie

    I have an Audiosonic universal remote for up to 6 devices, due to misplacing my remotes in a move. I can code in the Sony Bravia TV but not my Sony Hard Disk Recorder SVR-HD900. I have tried the codes given and also manual search and auto search with no luck. Any help would be great, many thanks in anticipation.

  19. Remote Control Codes

    Anabellen,
    Cybertec 4 digit remote codes are: 1119, 1147, 1190, 1309, 1381, 1391, 1138, 1171, 1181, 1535, 1562, 1564, 1733, 1743, 1752, 1786, 1812, 1892, and 1913.
    -CUR

  21. Dean

    I need a 3 digit code for a Sony DVP-SR760H model DVD player. I’m trying to configure my Samsung TV remote to control the above DVD player.

  22. Elsie Butler

    Need codes for a Daewoo television. I don’t know name of the remote but I have the model number.

  24. Liz

    Estoy buscando el código para seiki DVD en la lista del manual de un rca universal remote ,help please, gracias.

  25. Claudia Toranzo

    Hi I need the code to set up my DESAY DVD player with my RCA universal remote please.

Comments are closed.