Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  3. Sonda Robinson

    I have a LG TV and need the code to my remote, please help if can…. Thanks

  5. Jose

    Hi there – I’m looking for a universal code for a Dick Smith Set top box DSE GH5930.

    I am also told it is a rebadged Teac HDB849, so maybe that code.

    Thanks in advance

  8. Virginia McGlynn

    Hi I have a Kogan brand television and can’t find the number and it doesn’t seem to be finding it in the automatic search. No number in the book for this brand.

  10. gary v bosher

    charter remote 1060bc3-0780-002r. trying to program samsung hw-k360/za soundbar. tech says no samsung soundbar will work ?

  11. Heather

    I have a Toshiba tv /DVD combo TV and a RCA universal remote.. Wat arevthe codes so I can program them..thanks

  16. Russell

    I have a Tahoe brand TV and I desperately need the universal remote codes for it, can someone plz help

  17. Jim Adams

    I have a Phillips RC1445302/00B universal remote control (originally supplied by Verizon) and a Grace Digital Bluetooth receiver/amplifier model GDI-BTAR513.

    I would like to control the Grace Bluetooth receiver/amplifier with the Phillips remote control. I already tried the manual method of finding a remote control code using the instructions from Phillips. In this procedure about 250 4-digit remote control codes are tested, and none of them worked.

    I contacted Grace Digital, and so far, they were no help, or simply too lazy to try and find a code. Does anybody else have an idea how to find a remote code for the Grace Digital
    GDI-BTAR513 ?

  18. Erna

    I need a code for an AWA HD TV model MHDV2262-04, and have the All for One remote model UHC-7710

  19. Rolando San Pablo

    I have RENCO converter box and HUAYU HR-195F (3 digit codes)
    It is compatible?
    What code could i use?

  21. Alex

    I have a Toshiba tv with a DVD combo. I can get the tv to work but DVD won’t. Need a code for the tv/DVD. Rca remote, DVD player is on the side of the tv.

  25. Remote Control Codes

    davor pavlicic,
    Try using the remote code 11324 with your TV NEO LED-32665 FHD.
    -CUR

Comments are closed.