Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Philip Tully

    I am looking for the 4 digit code for a NeonIQ 26″ LCD TV for use with an Audiosonic remote.
    If you can’t find that one, any code for any other remote will do, just so I can operate it with a remote and not by the buttons on the side.
    Any help would be appreciated.

  6. John Anderson

    I have an older Yamaha receiver with a rav234 remote that has suddenly quit. Would like to purchase a universal remote to replace the factory one.

  8. Don Stubblefield

    I have two Coship DTV Converter Boxes Model N9901T with no remote for either. I would like to find a remote to use for the two.

  9. Todd Kowalske

    Looking for the code for a Insignia sound bar model # NS-SB316 and a Spectrum/Brighthouse remote # UR5U-8780L-BH2 remote.

  12. Lewis Philpot

    I have a Bright star remote control. Trying to program it to my Panasonic DVD VHS. It doesn’t have any component listed on it. Will it work for my DVD player?

  13. Jaja

    I have a universal remote control but i need codes to work towards my LG dvd player.
    I tried everything but I guess i am doing everything wrong because it still does not work.

  15. Del Boy

    New universal remote (Tevion) 8 in 1 for 19″ Medion TV MD20185 P13078.
    Tried all the codes in the code book supplied and none work even though it says success.
    Can anyone give me the correct code please?

  16. Melissa Mejia

    I need a code to program my Samsung blu-ray with my GE universal remote control.
    Also, my remote only has TV, DVR, CBL, DVD, SAT, AUX.

  17. Remote Control Codes

    Nic09,
    Remote codes for the Minami DVD player are: 063, 068, 061, 069, 083, 084, and 081.
    -CUR

  20. Remote Control Codes

    Clarinda,
    If you are using a DIRECTV REMOTE to control a PIXEL TV:
    -Slide button on the remote to TV.
    -Press and hold mute and select button until the green light on the remote blinks twice.
    -Press 991.
    -Then press 1.
    -Then press the TV power button once.
    -If the TV will not respond then press the channel UP button on the remote.
    -If that works press select to store the code and slide the switch back.
    -If it did not work then keep pressing channel up until it does work.

    If you are using a different universal remote control, try using the remote codes 10463 for PIXEL TV.

    If none of this works, please give us the model number of your Pixel TV and we will find the code that will work.
    Please give us the model number of your remote control also.

    -CUR

  24. Mikko Huotilainen

    I need the four digit code for Finlux 26FL760TC tv.
    I’ve tried dozens of codes I’ve found from websites, and some of them work partially, but for example EPG and MENU buttons don’t.
    I’d be very happy if you can tell me what code to use with this tv.
    My universal remote controller is a Silvecrest KH2158.

  25. Larkin Mayes Sr

    I have a Access HD Converter Box, DTA1030 that I don’t have a remote for it was lost.
    I do have a Charter Universal remote.
    I’m having trouble trying to find a code to operate converter box.

Comments are closed.