Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Stacy Luck

    I have PROSCAN LED TV MODEL # PLDED3273A-E And i bought it from my brother in law who has lost the remote for it. I have purchased 2 RCA universal remote controls for it, both of which I was unable to program for it. Please let me know if ya have any suggestions or tips for me PLZ! ?

  9. Shana

    What is the code for a very basic universal remote at the bottom it says SDT and then has a check after that

  10. Arlene Kramer

    I have a Zenith remote control that I would like to program to my LG TV and need a code.

  12. Steven Craig Iwig

    I have a tcl roku tv model 32s301 and an rc122 twc remote, I need a remote code for the tv. Thanks

  15. John

    I have a CHUNGHOP Universal Remote RM – L008 and want to control TECHNICS Audio Amp System SU X102. Would you please provide the remote control codes?

  20. Christine

    I have a Sansai URC·L969 Universal remote control I have a Changhong TV but I don’t have any codes to set these 2 items so they can be connected.
    I have to watch the same channel all day cause I can’t get up all the time to change channels.

  25. Fahir Kendall

    I have a Fisher VCR model number fvh4907 and a RCA universal remote number rcrn04gr that has no code listing for fisher electronics.
    How can I operate my VCR with this remote?

Comments are closed.