Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.
Remote codes for TV DVD AUDIO VIDEO
Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.
HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.
Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.
If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.
We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.
You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.
Below is a general way to program your universal remote control…
Setup one component at a time and you’ll move quickly through your system.
STEP 1:
Turn on the component you want to activate.
STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.
STEP 3:
Point the remote control at the component you just programmed.
STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.
There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?
If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.
I have a JVC Tv model #LT-40N570A.
UNIVERSAL REMOTE MASTER SKANDIA BW600.
I don’t have original remote, this is the 5th one I’ve tried.
I need a code for a sony dvd player to a satalite remote that’s universal.
I have a Seal Prestige 3.1 sound bar with no remote control.
I have a Logitech Handset.
Do you have a code for the Seal Prestige?
I am looking for the three digit universal code for a digitron dvd
Mike,
Use the remote code 030 or 096 for your Teac TV DVD combo.
-CUR
What is the code for a Teac TV DVD combo?
What is the code for a Veon 55″ TV SRO9112 is the model number
I need a code for my Magnavox DVD player.
Its model number is msd126.
I need a code for my 5 in 1 Vibe remote that works with my Element tv.
Need the codes for a Coby DVD player and a Phillips TV.
I have a GE universal remote, trying to get codes for Oleva TV that is not working.
I need a code for an rca convertor box and I’m trying to program a universal remote that’s a rca rcr6473dr.
I need the code for my apex tv model#avl2076
I have a LG model #4gl650 i need code # for a universal remote
I have a TCL tv (no roku) and a jumbo universal remote control, no cable no cox nothing just the tv, do you know the code?
I need a code for condere DVD player 1188b
I need Bang and Olufsen beolab 2000 remote code.
What is the code for a KONKA TV?
I usually have 057 for that but it doesn’t work properly.
I need the codes for both the Sony DVP-FX970 DVD player and the Sony DVP-SR760H DVD player.
I am looking for the remote codes for a Humax RM-F04 remote to control a Toshiba DVD player SD2010KB.
I have a Bose universal remote what is the code for a haier tv
I have a Hama universal ir 4 in 1 remote.
I need code for Grundig TV 32-6830t.
I have a Bose solo 5 soundbar and i need to know the remote code for a Panasonic TX-65CXW414.
I need the code to a sony blue ray/dvd player BPD-S370
I need the code to progam the Roku tv into my remote. We have suddenlink cable. The tv is an insignia NS-43DR620NA18 43inch