Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  5. Julio Irula

    I need code for my RadioShack remote 08A07 to operate my Ölevia Syntax LCD LT32HV

  6. James

    I have a ge universal remote that can control bluray,dvr,tv,cable,amp and aux. Im trying to program it to a LG tv. I do not have the code

  7. Gena

    I need codes to enter into a Sony Universal remote to operate with my Polaroid TV. TIA.
    Gena

  11. Jermaine Green

    My television is a SINGER brand and I cannot find any remote for it so if u can, please find a code for me

  12. Pamela

    I have a dish universal remote I need code for Emerson TV trying to connect the two together

  13. Kevin Pankey

    I have a Samsung remote for a model # ln-T4042h TV, and I want the codes to run my Sony dvd/VHS combo player

  14. Jerry Harmon

    I need codes for a Curtis DVD player for a GE universal remote RC-24950-C you can post it here

  16. Ed Ferry

    Need codes and instructions for Diredtv remote RC66RX for Vizio SB4451-C0 5.1 Sound bar, Samsung UNC 46C 6300 TV

  18. jon mateo

    what is the code for a NOVA LED TV ill be ussing a universal remote need the steo by step procedure

  19. Michael

    attempting to program a Bose soundbar remote to control a Samsung Blu-ray Disc Player, Model BD-HM57C. The code given by Bose for Samsung DVD is 0060. It works in so far as getting the DVD to play is concerned but it does not control other functions such as Pause, etc.
    Thank you for any suggestions.

  24. Horace Montebello

    I have a universal 4 tv remote control and I need to code it to a Grundig Arcance TV.

Comments are closed.