Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  3. Emma Harris

    Remote # ak59-00149a for a Blu-ray player Samsung BD hm 59
    I had to buy a replacement remote but I need to program it to work with the player and I can’t find the programming codes to do it can you help?

  5. Jake

    Need a code for an old Fluid DVD player. Model umber 1607000. Using a Bell FibreOp remote if that matters.

  9. Shirley pineda

    Hi what is the code for brico lcd monitor (the manufacturer of this tv stopped operating by 2012.- british continental limited

  11. Lisa Bischoff

    I need the code to set up my universal remote. It’s for a DVD player – Samsung 1080P7.
    Thanks.

  13. Richard Razon

    I have a universal remote control chungchop brand i try to use in promac led tv i know what is the codes of promac tv but dosn’t work.. will you help me

  16. Amanda

    did you happen to find a code as i am in the same boat looking for a code to program my tv rtu5540-C to my bell tv receiver 9400.

  17. Shelley

    Hello
    I have purchased the “big button home & co” universal remote from Kmart.
    I have managed to program my log and my Samsung tv using 4 digit codes.

    I am looking for a code for wdtv media player, 2558 does not seem to work.

    Also looking for a code for Telstra thub unit, we watch digital tv through this.

    Also cannot find code for nec DVD plater.

    Thank you so much

  18. Ron Cloutier

    I need the code to program a universal remote to operate RJ Tech RJ-4200 II DVD/VCD/CD+G Karaoke Player with USB/SD Reader. Thank you!!

  19. Glenda macer

    I need code for my new 40in element tv to program the remote to take one device to turn on and run it

  20. Alejandra Ayala

    Hey I have a Hisense TV for which I can not find a code for.
    The device model number is: HL50K160PL
    Helppppp 🙂

  23. Larry morton

    I need a code for my made in China universal remote that will activate my Toshiba HD DVD player to my element TV. Thank you

  24. sammie

    I need a code for my LG tv model #60LD550-UB and my onn universal remote 7252 1735 model is ONB13AV004 THANK YOU

Comments are closed.