Remote Control Codes

Codes For Universal Remotes has the remote control codes you need to control ALL your devices and components. Find your TV, Television, DVD, Blu-Ray Player, Receiver, Satellite BOX, Cable BOX, VCR players, Combo players, Media BOX, and Surround Sound component codes all in one place. We list ALL the codes you will need to make your universal remote control work with all the audio and visual equipment in your home theater.

Remote codes for TV DVD AUDIO VIDEORemote codes for TV DVD AUDIO VIDEO

Universal remote controls can control audio and video devices of just about any brand and model number. For each of your devices you will have to enter a 2, 3, 4, or 5 digit Device Code into the universal remote control. We will help you find the right Device Remote Code for your audio and video equipment. Your remote control model number is usually listed inside the battery compartment or on the back of the remote.

HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

Here are TV remote control codes for Aiwa TVs, Avera TVs, Dynex TVs, Element TVs, Emerson TVs, HiSense TVs, ILO TVs, Insignia TVs, JVC TVs, LG TVs, Magnavox TVs, Panasonic TVs, Philips TVs, RCA TVs, Samsung TVs, Sanyo TVs, Sceptre TVs, Seiki TVs, Sharp TVs, SONY TVs, TCL TVs, Toshiba TVs, Upstar TVs, Vizio TVs, Westinghouse TVs, XENON TVs, and Zenith TVs.

If you do not see the TV, DVD, Blu-Ray Player, Receiver, SAT BOX, Cable BOX, Roku, VCR, Media BOX, or Surround sound component on this page, look to the right sidebar as we will be adding new remote codes for ALL components.

We now have a full page of remote codes for video projectors for all brands of projectors, and an app that you can use on your phone to control a video projector.

You can try searching in the SEARCH BOX if you need to find a specific remote code. If you see that we do not list the component that you need a remote code for, please leave a comment and we will answer you question or create a new page for that particular TV or media component. Here are Vizio TV Universal Remote Setup Instructions.

Below is a general way to program your universal remote control…

Setup one component at a time and you’ll move quickly through your system.

STEP 1:
Turn on the component you want to activate.

STEP 2:
Point your universal remote toward the component and press the button Component button (TV for TV, DVD for DVD, etc.)
While holding the button down, type in the Device Code assigned to your brand then release both the Component button and the number key to save the code.
OR
Press and hold the component button you choose until it blinks, then type in device code and press enter.
The light will blink to confirm that the code has been stored.

STEP 3:
Point the remote control at the component you just programmed.

STEP 4:
Press the power button. If it turns off then you know it is programmed properly.
Check to be sure everything works before you move to the next component.
Press the POWER ON button to turn the component back on.
Test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for DVD). Repeat Steps 1-4 to activate the rest of your components.

There have been many asking… How To Control The Volume Of A Soundbar With A Cable or Satellite Remote?

If you need a Device Code for your Universal Remote, leave a comment below and we will get you the code you need to program your component.

866 thoughts on “Remote Control Codes”

  2. Melanie packer

    I need a code for my remote. My remote is a viv-urc-713 I need it for a regular Sony DVD player model number DVP-SR210P

  4. guy deschamps

    I have a Toshiba dvd video recorder DR7 and a Toshiba CT-90164 remote would you have the code please and how to do it. Thanks

  7. Carey

    I bought Logitec Harmony 650 remote used and programed already. I don’t have a computer to reprogram but can I put a code in manually to program a television for volume an channel change

  8. kevinmorphew

    I have a Vizio 32 inch TV with a universal remote I am looking for a remote control code model number on the remote is onb13av004

  9. David Rose

    Hi,
    I lost Manual, Have a Dick Smith TV DSE 15010262, as U may know Dick Smith no longer exists.
    I have a remote that works on my DSE (TV, even though front screen shows Hesinse, don’t know why), The remote is a DSE (Dick Smith) model as far as I can tell G6434.
    Now the challenge! LOL. Everything works on Bedroom TV. Cant get Kitchen TV to change to HDMI as I have no remote but that in the bedroom. Trying to connect a HDMI box, but know no code for the Remote to lock it in.

    Can U E-Mail me and help PLS. I have tried everywhere with no luck.
    David Rose

  11. Lisa Alexander

    I have a one remote brand remote and I am trying to find a code for a GPX gaming monitor I am using with my Chromecast as a TV. Is there a code for that?

  12. Jeff Vogt

    Looking for remote pairing codes for a Rockville RDJT6700 Component AM/FM Tuner. I want to control it with My Dish Network remote along with my TV, CD player, and Blu-Ray player (all already paired).

    Thanks.

  14. Joe Glasby

    I need a code for my “Total Control” URC, to operate my Manta Freeview TV / DVD model number LED1904DVD, many thanks, Joe Glasby.

  15. Tabatha Sanders

    I’m trying to program an RCA universal remote control-4 digit-to an onn dvd player but can’t find the code. Can you help?

  21. Edwardsimmons

    I need a programming code for a URC-8820-cisco remote to program a 42Samsung LCD smart TV

  23. Peter Kauschinger

    Device is sony dvpsvr500h. Universal remote harmony 300 from logitech. Procedure and code for dvd player

Comments are closed.